Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Evolar EVO-COVER-S
Summary of Contents for Evolar EVO-COVER-S
- Page 1 Modelnumbers: EVO-COVER-S, EVO-COVER-M, EVO-COVER-L EVOLAR COVER User manual...
-
Page 2: Table Of Contents
FOREWORD Thank you for purchasing the Evolar cover. This manual contains all the information required for the safe and correct use and installation of the Evolar cover. Make sure you have read and understood the entire contents of this manual before installing or maintaining the product. -
Page 3: Product
PRODUCT Description The Evolar cover is a heat pump/air conditioning enclosure. The Evolar cover is intended for use over installed heat pumps/air conditioners. This manual is suitable for the following Evolar covers: • Evolar S (27.56 × 43.31 × 19.69 inch) •... -
Page 4: Optional Parts
Optional parts Tools required (not included) • Screwdriver • Drill (with 0.31 inch and 0.39 inch bit) Evolar cover | User manual www.evolarshop.com... -
Page 5: Safety Instructions
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that could damage the surface. Do not use harsh chemical cleaning agents such as ammonia, acid or acetone when • cleaning the product. Evolar cover | User manual www.evolarshop.com... -
Page 6: Installation
Check that all parts are present and that they are not damaged. If parts are missing or damaged, contact Evolar. Installation steps STEP 1 Remove the film from the cover and the roof panel. STEP 2 Unfold the cover. Evolar cover | User manual www.evolarshop.com... - Page 7 STEP 3 Fasten the corner profiles with the screws. STEP 4 Fasten the roof panel onto the cover with the screws. Evolar cover | User manual www.evolarshop.com...
- Page 8 If the heat pump requires more air supply, fold the folding edge of the top plate downwards. STEP 6 NOTICE Drill the holes around your installed heat pump. Drill 0.39 inch holes in the wall using the drilling template supplied. Evolar cover | User manual www.evolarshop.com...
- Page 9 STEP 7 Screw the expansion bolts into the 0.39 inch holes. STEP 8 Place the cover over the air conditioning/heat pump and/or expansion bolts. Evolar cover | User manual www.evolarshop.com...
-
Page 10: Optional Parts
OPTIONAL PARTS Feet STEP 1 NOTICE Some Evolar covers already have pre-drilled holes. Drill 0.31 inch holes at the corners underneath the cover. STEP 2 Insert the feet in the 0.31 inch holes and tighten them with the nut supplied. -
Page 11: Back Panel
Back panel STEP 1 Screw the back panel against the Evolar cover with the screws. Bottom panel STEP 1 Screw the bottom panel against the Evolar cover with the screws. Evolar cover | User manual www.evolarshop.com... -
Page 12: Maintenance
Follow the local regulations for disposing of the Evolar cover. 7 WARRANTY The Evolar cover has a warranty period of 15 years. This warranty is void if the Evolar cover has been used differently than indicated in this manual. Evolar cover | User manual... - Page 13 Evolar Mercuriusstraat 5 6541 BM Nijmegen The Netherlands T +31 (0)24 2120369 www.evolarshop.com V1.0 | 05-2023...
Need help?
Do you have a question about the EVO-COVER-S and is the answer not in the manual?
Questions and answers