Child Lock; Daily Use - Haier HDW10F1S1 User Manual

Start a Programme
1. Press the ON/OFF button
2. Press to select the program you want on the dishwasher control panel.
3. Press to start the programme.
Pause and restart a wash programme
1. Press to pause the programme and open the door carefully. The current
washing programme indicator and running stage indicator will flash while the
dishwasher is paused.
NOTICE
There is a risk of being sprayed with hot water, do not fully open the door until
the spray arms have stopped rotating.
2.Load, remove, or rearrange any dishes if needed.
3.Close the door to restart the programme.
Start a Programme with Delay
Set a start time by the following procedure in order to delay a programme start:
1.Set a programme.
2.Press the Start delay button
3.Press the START/PAUSE button

Child lock

1. In the power on state, press the Rinse aid reset button and Start delay button
for 3s to activate the child lock function, and the Child lock indicator LED8 lights up.
2. In the locked state, the power key will not be locked. Press any other key, and
the child lock indicator will flash for 3s with a frequency of 3Hz.
3. In the locked state, press the Rinse aid reset button and Start delay button for 3s
to unlock, and the child lock indicator LED 8 goes out.
4. After setting the child lock, when you turn off the machine, in case fo power down
and the machine is in alarm state, the child lock will not be unlocked.
to turn the dishwasher on.
to seclect the required delay time.(3h, 6h, 9h).
and close the door.

Daily use

25