Lumag RAMBO-HM200 Original Operating Instructions
  1. Manuals
  2. Brands
  3. Lumag Manuals
  4. Chipper
  5. RAMBO-HM200
  6. Original operating instructions
Lumag RAMBO-HM200 Original Operating Instructions

Lumag RAMBO-HM200 Original Operating Instructions

Petrol wood chipper
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Translated from German to English - www.onlinedoctranslator.com
PETROL WOOD CHIPPER
original operating instructions
RAMBO-HM200
ATTENTION! The machine is delivered without engine oil and without fuel.
Both the model number and the serial number can be found on the nameplate on the machine.
You should keep both numbers safe so that you can access them in the future. This
Instructions explain the functions and applications of the machine.
FOR YOUR SAFETY
Before using the device, read the operating instructions,
Safety and warning instructions must be observed!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RAMBO-HM200 and is the answer not in the manual?

Questions and answers

Related Manuals for Lumag RAMBO-HM200

Summary of Contents for Lumag RAMBO-HM200

  • Page 1 Translated from German to English - www.onlinedoctranslator.com PETROL WOOD CHIPPER original operating instructions RAMBO-HM200 ATTENTION! The machine is delivered without engine oil and without fuel. Both the model number and the serial number can be found on the nameplate on the machine.

  • Page 2: Maintenance And Repair Work

    overview 1. Foreword 15th chipping operation 15.1 What may be processed 1.1 Information on the operating instructions 15.2 Hacking 1.2 Limitation of Liability 16. Maintenance and repair work 1.3 Designation of machine 1.4 Copyright 16.1 Maintenance work 1.5 Reservations 16.2 Maintenance plan 2.

  • Page 3: Limitation Of Liability

    1.1 Information on the operating instructions 1.4 Copyright This operating manual provides important information on how to use the RAMBO-HM200 wood chipper. The All documents are protected by copyright. The prerequisite for safe working is the correct observance distribution and reproduction of documents, of all safety instructions and handling instructions.

  • Page 4: Intended Use

    2. Intended use 3. Operating hours- restriction The petrol wood chipper – RAMBO-HM200 – is In residential and small settlement areas or on designed exclusively for chipping wood up to the premises of hospitals and care facilities, 12 cm thick. The machine is not suitable for shredders may not be operated all day on processing garden soil.
  • Page 5 5. Security 5.2 Safety instructions This section provides a comprehensive WARNING! overview of all important safety aspects for adequate protection of the operator as well as Familiarize yourself with the machine. for safe and trouble-free operation. Proper training is a prerequisite for working safely with this machine.

  • Page 6: Work Area

    and endanger other persons through Operation improper use. First-time users should seek instruction from WARNING! the seller to familiarize themselves with the The processed material is ejected from the characteristics of the machine, its intended use machine at high speed. Always wear and the necessary safety devices.
  • Page 7 If handled improperly, the sharp edges of end of work the knives can pose a significant risk of Do not leave the machine unattended while injury.Make sure that the two chopping blades the engine is running. and the counter blade are correctly installed and securely fastened.

  • Page 8: Service Security

    5.4 Transport must not be put into operation with such damage. When transporting the machine on a vehicle or Close the tank cap properly after refueling. trailer and before moving it to another location, switch off the engine and wait until the work tools have come to a standstill.

  • Page 9: Electrical System

    Work on the electrical system may only be neglect of ergonomic principles careless carried out by qualified electricians. personal Only use original LUMAG spare parts and protective equipment (PPE) accessories. The use of other spare parts and negligent use omission accessories increases the risk of accidents.
  • Page 10 6. Warning and information Prolonged, unprotected work with the machine can lead to hearing damage. symbols used → Always wear hearing protection. Hazards from materials and other substances Symbols are provided on the machine to contact, inhalation provide important information about the Thrown objects or liquids can cause health product and instructions for use.
  • Page 11 She safety shoes with Carry Keep bystanders away from the work steel caps. area. Chop Wear protective gloves. up to max. 120 mm diameter, depending on the type and freshness of the wood. Wear eye protection. electric start, ignition key (12V) Wear hearing protection.

  • Page 12: Part Designation

    7. Part designation 7.2 gasoline engine 7.1 Shredder Engine switch (main switch) = ignition switch on the electric starter handle recoil starter choke lever fuel tap trailer hitch air filter safety chain Spark plug, spark plug connector drawbar throttle lever Front axle, with parking brake muffler Chipper, incl.
  • Page 13 8. Functions oil filler plug with dipstick (13) The engine oil is filled into the dipstick holder. The dipstick must NOT be screwed down to check the oil level. 8.1 Engine Engine switch (main switch) = ignition switch on the electric oil drain plug (12) starter (1) The oil drain plug is located on the back...

  • Page 14: Technical Data

    9. Technical data pull rod (3) A pull rod is provided to better guide the machine. model number RAMBO-HM200 drive 4-stroke OHV Beninmotor 420 cm³ displacement IMPORTANT NOTE! Engine power, max. 9.0 kW* Remove the drawbar during loading! 3,600 rpm Engine speed max.

  • Page 15: Technical Description

    10. Technical Description Connecting the battery: 1. Turn the ignition key on the electric starter (1) to the OFF position and remove 2. First connect the green cable to the negative The wood chipper is used to produce firewood. pole (-). 3.

  • Page 16: Scope Of Delivery

    If you have any questions or problems during installation, please contact us. You can reach us by email: info@lumag-maschinen.de or by phone at +49 8571/92 556-0. To simplify the assembly process, we have divided the assembly instructions into several steps.
  • Page 17 – Lifting and transport operations should only be carried out under the guidance and instructions of a supervisor. – Lifting and transport operations must always be carried out only by qualified and authorised persons. – Never stand under a raised load. –...
  • Page 18 Step 4: Mount the rear part, ejection Step 3: Install the steering wheels (H) funnel, foldable (C) The steering wheels (H) are attached to the frame with rotor and The machine can now be lowered onto the wheels gasoline engine (B) assembled. for further assembly and secured using the brake on fastening material 1.
  • Page 19 Step 6: Bag hook on front part, Step 8: Safety bar (EMERGENCY STOP) (J) assemble Install the ejection funnel (F) Screw the 6 bag hooks, 2 on each side + 1 hook Mount the EMERGENCY STOP bracket on the at the front, as shown in the pictures on the EMERGENCY STOP frame of the filling funnel.
  • Page 20 Connect safety circuit (EMERGENCY STOP) Step 10: Connect the battery Connect the cable (a) to the motor cable (B) ATTENTION! Before connecting the near the battery holder. battery, the ignition key must be turned to “OFF” and removed! The battery is mounted under the filling funnel.

  • Page 21: Drive Type

    13. Drive type Check engine oil level Turn off the engine and let it cool down. 1. Unscrew the dipstick. 13.1 Gasoline engine 2. Wipe the dipstick with a clean cloth and reinsert it, do not screw it in. The machine is powered by a petrol engine. For information on starting and stopping the Pull out the dipstick again and read the oil level;...

  • Page 22: Storing Fuel

    13.2.2 Refueling refueling 1. Turn the fuel tap to OFF. 2. Clean the area around the fuel tank cap of dirt and foreign objects. DANGER! 3. Unscrew the tank cap. 4. Fuel tank withgasoline (RON95)To allow health risk of explosion through room for the gasoline to expand, do not fill Combustion engine.

  • Page 23: Preparation For Use

    14. Commissioning When working, wood chips, stones, etc. can be thrown out. No other people or animals may be in the ejection area = danger zone. The machine must not be set up on a sloping surface. Particular care must be Also pay attention to vehicles, windows and taken to ensure that the floor does not other objects so that they are not damaged.
  • Page 24 → start with electric starter (E-START) DANGER! 5. Insert the ignition key into the electric starter (1) and turn the key to the ON position. Do not start the engine in enclosed spaces. The Then turn the ignition key to the START position exhaust fumes contain carbon monoxide, which is and hold it in this position for a maximum of 5 very toxic if inhaled!

  • Page 25: Idle Speed

    IMPORTANT NOTE! Stopping the engine suddenly at full throttle can cause engine damage. 14.4 Stopping the engine in an emergency In dangerous situations, machine movements must be stopped as quickly as possible and the power supply switched off. In case of danger: 1.
  • Page 26 For constipation: 15th chipping operation Before each use, check the machine for: – loose screws and nuts – damaged rubber flap in the feed hopper, Switch off the engine and remove the spark plug replace if necessary connector for safety reasons! –...
  • Page 27 15.2 Hacking – Process material with a high water content alternately with dry material to avoid clogging the machine. Make sure the wood chips are as DRY as – possible! Wood chips that are too wet The knife mechanism draws in the material to will inevitably lead to blockages and be processed largely independently.

  • Page 28: Maintenance Work

    – Non-slip safety shoes – Safety glasses with side protection when working on pressurized components or near pressurized systems Only use original LUMAG spare parts. Other parts can cause unforeseeable damage and injuries. Work on the electrical equipment may only be carried out by qualified electricians.
  • Page 29 16.2 Maintenance plan The following sections describe the maintenance work required to ensure optimal and trouble-free operation. After After After Every Before 25 Bh* 30-50 season everyone everyone respectively Requirement maintenance work first Bra* Bra* 1 bra* 5 Bh* Check the machine ■...
  • Page 30 Fuels and lubricants used must comply with the operator's operating fluids regulations and the specified specifications; if necessary, consult the supplier. fuel module specification filling quantity lubrication points RAMBO-HM200 fuel Motor 6.5 liters gasoline ROZ95 or higher 10W-30 or Motor 1.1 liters...

  • Page 31: Drive Belt

    4. Thoroughly clean the area around the oil Blunt blades must be replaced. Damaged outlet blades (cracked, knocked out, severely bent or 5. Screw the oil drain plug back in otherwise damaged) must be replaced 6. Slowly pour 1.1 liters of engine oil into the oil immediately.
  • Page 32 16.5.1 Check drive belt for wear 16.6 Changing/cleaning the air filter To check the drive belts: DANGER! 1. Remove the belt cover 2. If the drive belts show wear, both must be Risk of fire and explosion when handling replaced flammable liquids! See…...
  • Page 33 16.7 Check/change/clean spark plug 16.9 Check wheels and tire pressure Wheels (tread and tire condition) and tire pressure: – Check that the screw connection on the wheel DANGER! axles is correctly seated. Danger of burns! – Check for cuts and foreign objects in the tire tread The engine and parts (e.g.
  • Page 34 Check and, if necessary, repair loose – Dispose of cleaning cloths and processing residues connections properly. in an environmentally friendly manner in compliance with applicable local regulations – use a soft brush or a vacuum cleaner for Interval: weekly interior cleaning After cleaning, check that all previously opened covers and safety devices have been properly 16.13 Check and repair construction...

  • Page 35: Transport By Hand

    17th transport 17.2 Transport with chassis 1. Attach the trailer hitch to the towing vehicle. 2. Connect the safety chain to the towing DANGER! vehicle. 3. Check tire pressure, max. 2.5 bar Danger of burns from hot surfaces on the (transport wheels) engine! DANGER!
  • Page 36 18. Storage 19. Disposal Storage of the machine and temporary When the machine is no longer serviceable and decommissioning. is to be scrapped, it must be deactivated and dismantled, that is, it must be brought to a condition where it can no longer be used for Store the machine under the following conditions: the purposes for which it was designed.

  • Page 37: Troubleshooting

    20. Troubleshooting WARNING! Any faults in the machine or engine that require major intervention should always be repaired by your LUMAG specialist workshop or an authorized specialist workshop. Improper intervention will void the warranty. Before any troubleshooting – Turn off the machine –...
  • Page 38 The guarantee for LUMAG products is 24 months for exclusively private use, and 12 months for commercial or Service time: Monday to Thursday from 7.30 a.m.

  • Page 39: Ce Declaration Of Conformity

    22. CE declaration of conformity In accordance with the provisions of the EC directives Machinery Directive 2006/42/EC EMC Directive 2014/30/EU explains the company LUMAG GmbH Rudolf-Diesel-Straße 1a D-84375 Kirchdorf a. Inn Phone: +49 8571 / 92 556-0 Fax: +49 8571 / 92 556-19...
  • Page 40 23. B WARNING! All repairs to the machine must be carried out by authorized personnel. Any necessary electrical work should only be carried out by an authorized specialist.
  • Page 41 24. Notes...
  • Page 44 Subject to change! Version RAMBOHM200 (07.2024 D) LUMAG specialist dealer can be found at: www.lumag-maschinen.de LUMAG GmbH Rudolf-Diesel-Str. 1a D-84375 Kirchdorf a.Inn Germany Internet:www.lumag-maschinen.de...

Table of Contents