U N P A C K I N G - Altec Lansing A7 Owner's Manual

u n p a c k i n g

IMPORTANT: PROTECT THE LOUDSPEAKER
The loudspeaker cone assemblies are fragile and should not be touched.
Before removing the protective shipping material, look for obvious
STEP 1:
signs of shipping damage such as severely crushed corners or deep
punctures that may have marred the speaker cabinet. If severe
damage has occurred, immediately contact the shipping company
to file a claim.
Using a knife, carefully cut away any plastic which is holding the
STEP 2:
cardboard-encased speaker on the pallet.
Use metal snips to cut the metal straps holding the cardboard-
STEP 3:
encased speaker on the pallet.
Remove the top cardboard cap.
STEP 4:
Using a knife, carefully cut on the dotted line printed along one
STEP 5:
corner of the cardboard. Only cut deep enough to penetrate
the cardboard.
Remove the protective cardboard, foam, and plastic
STEP 6:
packaging material.
IMPORTANT: USE CAUTION WHEN MOVING THE LOUDSPEAKER
Because each A7 weighs approximately 200 pounds, use caution when moving
the loudspeaker to avoid personal injury. Use multiple people or a dolly and
protective blankets when moving the loudspeaker off of the pallet and to its
final location.
IMPORTANT: RETAIN THE PALLET AND PACKAGING MATERIAL
If there is a need to return the loudspeaker under warranty conditions, you will
need the pallet and packaging material to properly repackage the loudspeaker
for transit.
2 A 7 O w n e r ' s M a n u a l