PXN P30 Pro Manual

Product Overview

Supported Size of Phone

4-6.67 inches, max to about 165mm

System Requirement

iOS Native Mode: Support iOS 13.0 and later.
Android HID Mode: Support Android 4.4 and later.
Plug and Play Mode in Android: Support the phone with Android 7.0 and later. (Non MediaTek chip cell phone)

Power ON / OFF

ON: Short press POWER button for 1 second, the Battery Indicator is always RED.
OFF: Long press POWER button for 3 seconds, the Battery Indicator is OFF.

Supported Modes	Mode Switch	Mode Indicator State
iOS Native Mode		Purple light keeps on
Plug and Play Mode in Android		Blue light keeps on
Android HID Mode		Red light keeps on

iOS Native Mode

* Compatible with Apple MFI games, requires iOS 13.0 and later system.

Step 1
Press POWER button of the Controller to power on.

Step 2
Press buttons at the same time to pair until purple LED indicator flashes.

Step 3
Open the BT function on iPhone to search the controller and click "PXN-P30PROm" to pair with. When the purple LED indicator keeps on, the connection is successful.

Step 4
For the games that natively support controller, you can download the app [ PXN Games ] to view the game list.

Download for iOS: App Store search [ PXN Games ].

Plug and Play in Android

* Requires Android 7.0 and later system.

Step 1
Press POWER button of the Controller to power on.

Step 2
Press buttons at the same time to pair until blue LED indicator flashes.

Step 3
Open the BT function in Android to search the controller and click "PXN-P30PROa" to pair with. When the blue LED indicator keeps on, the connection is successful.

Step 4
Check the custom button tutorial on Android APP for button mapping.

Download for Android: Google Play search [ PXN Play ].

In Plug and Play Mode

Turn on the button layout prompt function: Press the button to turn on.

Open the button mapping setting interface: Press the button to associate.

Android HID Mode

* Compatible with the games that natively support controller, requires Android 4.4 and later system.

Step 1
Press POWER button of the Controller to power on.

Step 2
Press buttons at the same time to pair until red LED indicator flashes.

Step 3
Open the BT function in Android to search the controller and click "PXN-P30PRO" to pair with. When the red LED indicator keeps on, the connection is successful.

Step 4
The game that natively supports the controller can directly enter the game to use the controller.

Indicator Description

	Controller State	Battery Indicator State
Power ON / OFF	ON	Red Indicator ON
	OFF	Red Indicator OFF
Charging Function	During Charging	Red Indicator Flashes Slowly
	Full Charged	Red Indicator Keeps ON
	Insufficient Battery	Red Indicator Flashes Quickly
Sleeping Function	Under the Pairing State	The controller will enter the sleeping state after 60 seconds no connection
	Under the Reconnect State	The controller will enter the sleeping state after 60 seconds no connection
	Under the Working State	The controller will enter the sleeping state after 10 minutes no action
	Under the Sleeping State	Press the Power button , the controller will be connected again

Reset Function

When the controller has functional errors, crash or other abnormalities, you can reset it by pressing the RESET button on the back of the controller, and then power on and reconnect the controller.

Attention

• Avoid strong vibration, do not disassemble, modify and repair by yourself.
• Prevent water or other liquids from entering the inside of the controller, which will affect the function and service life of the controller.
• Built-in battery, please do not throw the controller into fire or river (sea) to avoid explosion or pollution of the environment.
• Avoid placing in humid, high temperature or soot place.
• Children should be under adult's supervision to use the product.

Product Specification

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download PXN P30 Pro Manual