PXN V9 - Gaming Racing Wheel with Pedals Manual

System Requirements

Product Overview

Clamp Installation

The steering wheel is equipped with a pair of clamp to fix the wheel on desktop.

1. Put the suction cups into bottom slots, then rotate to lock up the suction cups.
   
2. Put the clamps into bottom slot.
   
3. Adjust the clamp to proper place.
   
4. Clip the steering wheel on desk, then tighten the screw staff.
   

Interface Connection Diagram

Connection Interface for Back of Wheel

Connect with PC

1. Please connect the pedals and shifter according to user needs before using.
2. Plug the USB interface of the steering wheel into PC.
   
3. Working mode is default to X-input, after successful connection, the red indicator will stay on.
4. You can shift working mode by pressing the MODE button.

How to shift Working Mode?

Press MODE button for 3 seconds on steering wheel until red indicator flashes. Then, you can shift working mode to D-input.

X-input Mode
Recommended game are Need for Speed 13, Dirty2/3, Ridge Racing etc.

D-input Mode
Recommended game are Need for Speed 1-12, Euro Truck Simulator 2 etc.

Function Testing on PC

Function testing of the steering wheel is available on computer. The specific steps show below:
Win7 System: Open Control Panel → Device and Printer → right mouse click Controller icon → Game Controller Setting, click Properties Testing.
Win10 System: Setting → Devices → Device and Printer → right mouse click Controller icon → Game Controller Setting, click Properties Testing.

Connect with PS3

1. Please connect the pedals and shifter according to user needs before using.
2. Plug the USB interface of the steering wheel into PS3, then power on PS3 console.
   
3. The red indicator will remain on when connected successfully. Then power on console and launch game to play or conduct relevant function setting on PS3.

Connect with PS4

Diagram of PS4 connection

1. Please connect the pedals and shifter according to user needs before using.
2. Power OFF the original PS4 controller, then connect original PS4 controller with steering wheel by Micro USB cable.
3. Plug the USB interface of steering wheel into PS4, and power on the PS4 console.
4. Press MODE on steering wheel. The connection will be successful when the red indicator remains on.

Connect with XBOX ONE/XBOX SERIES

Diagram of XBOX ONE connection

1. Please connect the pedals and shifter according to your needs.
2. Power OFF the original XBOX ONE/XBOX SERIES controller, then connect the original XBOX ONE/XBOX SERIES controller with steering wheel via USB cable.
3. Plug the USB interface of steering wheel into XBOX ONE/XBOX SERIES X&S, and power on the XBOX ONE/XBOX SERIES console.
4. Press MODE button on steering wheel. The connection will be successful when the red indicator remains ON.

Connect with SWITCH

* Enter homepage of SWITCH, select Setting → Controllers and Sensors → select Pro Controller Wired Connection. Please make sure that the option state is ON.

Connect with SWITCH console

1. Please connect the pedals and shifter according to user needs before using.
2. Please plug the Type-C OTG into SWITCH console.
3. Connect the steering wheel USB interface with Type-C adapter.
4. The red indicator on the steering wheel will remain on when connected successfully.
   (Note: The Type-C OTG is not included )

Connect with SWITCH Dock

1. Please connect the pedals and shifter according to user needs before using.
2. Place the SWITCH console into the dock to ensure successful connection.
3. Plug the USB interface of steering wheel into SWITCH dock and power on SWITCH console.
   
4. The red indicator on the steering wheel will remain on when connected successfully.

Shifter Function

High/Low Gear Shifting:
The first button is used to shift into a lower gear or a higher gear in the game

Handbrake Switch:
The second button is used to switch handbrake ON/OFF.

Low Gear:
1, 2, 3, 4, 5, 6, R1

High Gear:
7, 8, 9, 10, 11, 12, R2

Unit's High Configuration Function

There is a V9 Tool for configuration function on mobile.
Download and Usage of V9 Tool:

• Sensitivity Adjustment
• Vibration Adjustment
• Maximum Effective Turning Angle Setting
• Button Programming
• Button Configuration in Game
• Button Function Testing

Scan the QR code to download V9 Tool

Sensitivity Adjustment

High Sensitivity
Press and hold the "PROG" button until the red indicator flashes quickly. Then, press " " on the D-pad to save. The adjustment will be successful when the red indicator is ON.
(Suitable for PS3, PS4, XBOX ONE, XBOX SERIES X&S platforms)

Medium Sensitivity
Press and hold the "PROG" button until the red indicator flashes quickly. Then, press " " on the D-pad to save. The adjustment will be successful when the red indicator is ON.
(Suitable for PS3, PS4, XBOX ONE, XBOX SERIES X&S platforms)

Low Sensitivity
Press and hold the "PROG" button until the red indicator flashes quickly. Then, press " " on the D-pad to save. The adjustment will be successful when the red indicator is ON.
(Suitable for PC platforms)

Setting Maximum Effective Turning Angle

Maximum Effective Turning Angle
For example, the maximum effective turning angle of steering wheel is 180 degree, The maximum effective turning angle is 90 degree to the left or right, and the rotation exceeding 90 degree is invalid rotation.

How to set up?

1. Turn the steering wheel to a 900° rotation angle.
   
2. Press and hold the PROG button until the indicator flashes red.
3. Turn the steering wheel to expectation angle (more than 60 degree), press OPTION button, The red indicator will remain ON when set successfully.

Button Programming

Setting Buttons: Left paddle, Right paddle, Left pedal, Middle Pedal, Right pedal, L3, R3, High/Low Gear button on Shifter, handbrake button on shifter, 1-6 Gear on Shifter, R-Gear on Shifter.
Programming Available Buttons: A, B, X, Y, L1, L2, R1, R2

Programming Function

1. Press and hold PROG button for 3 seconds until the red indicator flashes quickly.
2. Press the Setting Button, the red indicator will flash slowly.
3. Press the Programming Available Button, program will be successful when the red indicator remains ON.

Clear One Programmed Button

1. Press and hold PROG button for 3 seconds until the red indicator flashes quickly.
2. Press the Setting Button twice. It will be cleared successfully when the red indicator remains ON.

Clear All Programmed Button

1. Press and hold PROG button for 3 seconds until the red indicator flashes quickly.
2. Press and hold the OPTIONS button for 4 seconds. It will be cleared successfully when the red indicator remains ON. The steering wheel sensitivity will be recovered to a higher level.

Note
Press and hold PROG button for 3 seconds until the red indicator flashes quickly. Press and hold PROG button again to withdraw from the program.
Press and hold PROG button for 3 seconds until the red indicator flashes quickly. Autowithdraw will occur if no action is taken in 10 seconds.

Audio Communication Function

The steering wheel has an audio communication function on the XBOX ONE/PS4/XBOX SERIES X&S platform.

(Note: When the steering wheel connected with shifter, headphone and Microphone function will be affected on XBOX ONE/XBOX SERIES X&S platform )

Attention

• Avoid strong vibration. Do not disassemble, refit or repair on your own.
• Avoid water or other liquid In or around the steering wheel - it may affect the performance of the steering wheel.
• Keep out of humid, high temperature or soot place.
• Please handle gently when connecting and removing the steering wheel.
• Adult supervision is recommended for children's use of this product.

Product Specifications

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download PXN V9 - Gaming Racing Wheel with Pedals Manual