Charging battery
Use an AC adaptor (supplied/optional/commercially available) and USB connection cable
(supplied/commercially available) to charge the battery.
• Depending on the country or area where the camera was purchased, the AC
adaptor or USB connection cable may not be supplied with the camera.
• For charging, we recommend using the supplied AC adaptor or the AC adaptor
(DMW-AC11: optional).
• Always charge before first use! (battery shipped uncharged)
• Charge the battery while it is in the camera.
Camera status
Turn off
Turn on
●
The battery can be charged using a commercially available AC adaptor or USB connection cable.
• Recommended specifications for AC adaptors (commercially available)
– Supports DC 5 V / 3 A (15 W) output
– USB Type-C
• For charging, use a USB connection cable with an output of 15 W or higher.
●
You can also use an AC adaptor of 5 V / 500 mA or higher for charging. However, charging time
may be longer than the recommended AC adaptor.
●
We do not guarantee operations with all commercially available devices.
●
Charge the battery using this camera and the specified method. Using charging methods other
than those specified may result in fluid leakage, overheating, combustion, rupturing, etc., and
these may cause injury.
About batteries that you can use with this unit
• The battery that can be used with this unit is DMW-BLG10.
It has been found that counterfeit battery packs which look very similar to the
genuine products are made available to purchase in some markets. Some of
these battery packs are not adequately protected with internal protection to
meet the requirements of appropriate safety standards. There is a possibility
that these battery packs may lead to fire or explosion. Please be advised that
we are not liable for any accident or failure occurring as a result of use of a
counterfeit battery pack. To ensure that safe products are used we recommend
that a genuine Panasonic battery pack is used.
Charge
Yes
No
19
Preparations
Need help?
Do you have a question about the LUMIX DC-TZ99 and is the answer not in the manual?