Garmin APPROACH CT1 Owner's Manual page 5

See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Attaching a Club Tracking Tag to a Club
1 Locate the tag label
Your set comes with 16 tags, each labeled and programed with one of 16 club types. The tag label identifies
the club type.
2 Locate your club that matches the tag label.
3 Screw the tag into the hole at the end of the grip.
TIP: You can use the installation tool included in the box to improve your hold on the tag when screwing it
into the grip. Holding the tag and twisting the grip may make installation easier.
4 Tighten the tag so it does not move during use.
5 Repeat steps 1-4 for each remaining tag in your set.
NOTE: If you have a club type that does not match one of the 16 tag labels, you will have an option to
manually assign the tag when you enable club tracking on your watch
Introduction
Introduction
on the underside of the tag.
WARNING
(Enabling Club Tracking, page 2).
1