Summary of Contents for Spectrum Industries vLT-30 55321
Page 1
Thank you for purchasing Spectrum products! Spectrum Industries, Inc 925 First Avenue, Chippewa Falls, WI 54729 USA 800 235 1262 715 723 6750 www.spectrumfurniture.com...
Safety • Read this owner’s manual before assembly or operation. • Keep the unit powered OFF before plugging or unplugging from outlet. • Do not allow children to move cart. • Be sure devices are turned OFF before plugging into cart. •...
Cord management 1. Open the rear door(s). Be sure the cart power unit cord(s) are unplugged. 2. Attach the laptop chargers to the cord management trays using the included zip ties and cord management slots. Figure 3 and 4. (Excess cord can be bundled with the charger if necessary.) 3.
Page 4
section view power-side student-side charge cord zip tie zip ties laptop zip ties charge cord position #3 laptop chargers charge cord position #1 charge cord position #2 charge cord zip tie 16-outlet zip ties power unit laptop zip ties charge cord position #3 laptop power switch...
Page 5
cord management student-side views zip ties worksurface laptop vLT-15 16 storage slots ⁄ ”W [6.99 cm] x 16 ⁄ ”D [41.12 cm] x 14 ⁄ ”H [37.47 cm] Figure 6 zip ties worksurface ⁄ ”W [6.99 cm] laptop vLT-30 30 storage slots ⁄...
Page 6
Laptop charging - power side 1. Plug each power unit into a wall outlet. If you have the vLT-30 be sure a separate circuit is used for each power unit. Figure 9. 2. With power unit(s) and laptops plugged in, flip the power switch(es) to the ON position to begin charging. vLT-15 power cord to wall outlet...
Page 7
vLT-30 Laptop charging with cycle timer 1. Switch both power units and the cycle timer OFF. 2. Route the power unit cords as shown and plug one in to the A side outlet, and one into the B side outlet on the timer. Figure 10. (routing these cords behind the power units will provide easier access to the outlets.) 3.
Door stop adjustment screw stop If necessary, the door stop can be moved to adjust the closed position of the doors and lock rods. Phillips screwdriver 1. To adjust, loosen the Phillips screw slightly with a screwdriver. Figure 15. 2. Move the stop until the door is positioned correctly. Be sure the lock rods will engage the lock rod hole.
Optional Cycle Timer ON / OFF switch (controls power to timer ‘A’ and ‘B’ outlets) cycle switch 15-amp reset button timer left (A) power right (B) power unit auxiliary control unit outlet and outlet and indicator (constant-power) indicator 2-outlets used for accessories such as Wi-Fi routers, teacher Note: Each power unit in the...
Warranty Statement WE WILL MAKE IT RIGHT FOR YOU! Spectrum is committed to provide complete customer satisfaction. Each of our products is manufactured from the best materials available and each product is stringently monitored throughout the production process through our P.A.C.E. program (Product Assurance to meet Customer Expectations). We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below from the date of delivery.
Need help?
Do you have a question about the vLT-30 55321 and is the answer not in the manual?
Questions and answers