Subscribe to Our Youtube Channel
Related Manuals for VESTEL EVC06 Series
Summary of Contents for VESTEL EVC06 Series
- Page 1 ELECTRIC VEHICLE CHARGER EVC06-DCHC60 Ser�es User Manual © 2024 VESTEL MOBILITY - All rights reserved English - 1...
- Page 2 9.3.1.1 - VEHICLE CONNECTION & CHARGING...........10 9.3.1.2 -STOP CHARGING..................12 10- CIRCUIT BREAKER LOCATIONS FOR CHARGING OUTPUTS................13 11- ERROR AND FAULT CONDITIONS..........................14 11.1 - ERROR CONDITIONS..........................14 12 - CLEANING AND MAINTENANCE..........................15 © 2024 VESTEL MOBILITY - All rights reserved English - 1...
- Page 3 • The charging station is made for indoors and outdoors. It can also be used in public open spaces. © 2024 VESTEL MOBILITY - All rights reserved English - 2...
- Page 4 1.2 - FIRE FIGHTING INSTRUCTIONS FOR GLOBAL ELECTRIC VEHICLE CHARGING STATION • Personal Safety: If you observe a fire or notice any danger signs, prioritize your safety above all else. Do not take unnecessary risks. © 2024 VESTEL MOBILITY - All rights reserved English - 3...
- Page 5 • Use appropriate protection while connecting the device to the main power distribution cable. © 2024 VESTEL MOBILITY - All rights reserved English - 4...
- Page 6 Minimum cable cross-sections are provided for maximum AC input current. The final cross-sections of the installation conductors should be calculated by the installer, taking into account the distances and mounting location conditions. © 2024 VESTEL MOBILITY - All rights reserved English - 5...
- Page 7 ISO 15118-1 / 2 / 3 DIN 70121 Residual current sensing, Insulation monitoring, Over cur- rent / Over voltage / Under voltage / Short circuit / Over Internal Protections Temperature / Surge Protection © 2024 VESTEL MOBILITY - All rights reserved English - 6...
- Page 8 0 - 2,000m After the product is energized at low temperatures, it should wait for the heater in the charger to activate, and charging should be done after this process. © 2024 VESTEL MOBILITY - All rights reserved English - 7...
- Page 9 Payment Terminal Option DC CCS Output Outlet Emergency Button (Optional) Access Cover for CTB, PLC Board and HMI Fan Access Cover All products’ images are given for representative purpose only © 2024 VESTEL MOBILITY - All rights reserved English - 8...
- Page 10 In the main screen on the charging station display, you may either tap the plug you want to use or simply connect that plug to your car. All products’ images are given for representative purpose only © 2024 VESTEL MOBILITY - All rights reserved English - 9...
- Page 11 All products’ images are given for representative purpose only Tap your RFID card or scan QR Code to start charging. All products’ images are given for representative purpose only © 2024 VESTEL MOBILITY - All rights reserved English - 10...
- Page 12 All products’ images are given for representative purpose only While charging, charging state can be seen in the main menu. All products’ images are given for representative purpose only © 2024 VESTEL MOBILITY - All rights reserved English - 11...
- Page 13 All products’ images are given for representative purpose only Tap your RFID card or scan QR Code to stop charging. All products’ images are given for representative purpose only © 2024 VESTEL MOBILITY - All rights reserved English - 12...
- Page 14 Disconnect the charging cable. After disconnection, you will automatically move to the main screen. All products’ images are given for representative purpose only © 2024 VESTEL MOBILITY - All rights reserved English - 13...
- Page 15 Note: The tilt angle is 30 degrees by default, but this value can be changed via WEB UI connection. © 2024 VESTEL MOBILITY - All rights reserved English - 14...
- Page 16 • If any RCCB of DC CCS or Chademo is tripped, check the insulation of the related input cables. Then, turn on the RCCB as shown in the figure-below. © 2024 VESTEL MOBILITY - All rights reserved English - 15...
- Page 17 Please check if there is a power outage. Then check the upstream distribution All outputs are General error box current switch. If the outputs are still unavailable unavailable, please contact the authorized service. © 2024 VESTEL MOBILITY - All rights reserved English - 16...
- Page 18 Distribution elements (MCCB, MCB RCCB) Distribution elements (MCCB, MCB RCCB) should be checked and tightened when going for maintenance. It can be tightened with a screwdriver with a torque of 2 Nm. © 2024 VESTEL MOBILITY - All rights reserved English - 17...
- Page 19 When going for maintenance, a mechanism should be set up like measuring with meger. After the piles are driven, the voltage between the two piles should be less than 1V © 2024 VESTEL MOBILITY - All rights reserved English - 18...
- Page 20 © 2024 VESTEL MOBILITY - All rights reserved English - 19...
Need help?
Do you have a question about the EVC06 Series and is the answer not in the manual?
Questions and answers