Aqua Control SP10 Installation & Owner's Manual page 5

INSTALLATION TOOLS & MATERIALS
For quick, easy and professional installations, the following tools and materials are needed:
 Utility razor knife
 Flat head screwdriver
COMPESSOR INSTALLATION
The compressor is designed for easy placement on the ground. The entire system can be
hidden behind landscaping and foliage. Do not cover the compressor with a fake rock or
other enclosure, as it needs fresh air to keep it cool. In places that reach over 100°F, shading
of the compressor is recommended.
DIFFUSER ASSEMBLY – ALL MODELS
The following steps still need to be completed prior to installing the Diffuser:
 Screw Membrane Diffuser Tube to blue check valve (arrow on check valve must point
towards tube diffuser) as shown below. Hand tighten only.
 Push self- weighted air tubing onto barb. Tighten together using hose clamp.
 For SP30 and SP40, you will need to install the appropriate Hose Barb for the size of
self-weighted tubing that is being utilized.
5