Assa Abloy NORTON RIXSON UniTrol J1600 Series Installation Instructions

J1600 Series UniTrol Non-Handed Door Closer
Arm Models UNI-J1601, UNI-J1603BC, and UNI-J1604BC
Top Jamb Mount Installation Instructions
Non-hold Open and Hold Open (H) models, adjustable size 1-6 (UNI-J1601(H) model
size 3 & 4 (UNI-J1603BC(H) and UNI-J1604BC(H) models). Hold open models are not UL-listed.
WARNING
This product can expose you to lead which is known to the
state of California to cause cancer and birth defects or other
reproductive harm.
For more information go to: www.P65warnings.ca.gov.
Included Components
Closer
Screw Pack
(Refer to page 2 for a
Pinion Cap
list of contents)
To Determine Your Hand of Door:
Right Hand
Reverse
LEFT
HAND
DOOR
Copyright © 2019, 2020, 2022, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9316-2534-020 Rev 5 02/23
Hold Open Control
(Hold Open Models)
Left Hand Door - LH
Right Hand Reverse - RHR
Arm
Main
Plate
Arm
Screw
Main Arm
Forearm
Hold Open Option
To Identify Your Model:
Left Hand
Reverse
RIGHT
HAND
DOOR
Size
Code
Approved 2023-02-23
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
UNI-J1600 (H)
Right Hand Door - RH
Left Hand Reverse - LHR
Sleeve-Nut
Rod Unit
(Arm Number Stamp)
Rod Screws
Spring Power
Adjustment
(1601 ONLY)
1-6 = 1601 Date
3 = 1603BC Code
4 = 1604BC
) and
Hold Open Control
(Hold Open Models)
Optional Components
Hold Open
On
1687Drop Plate
For low ceiling
clearance
Tools Needed:
Hold Open
Force
Off
Press & Turn
Decrease Increase
Hold Open