M7 DOM-101 Manual page 11

WARNING
or missing, DO NOT attempt to attach the
battery or operate the tool until the broken
or missing part is replaced. Failure to do so
could result in possible serious injury.
WARNING
modify this tool or create accessories not
recommended for use with this tool. Any
such alteration or modification is misuse
and could result in a hazardous condition
leading to possible serious injury.
WARNING
be connected to the battery when you are
assembling parts, making adjustments,
installing or removing blades, cleaning, or
when it is not in use. Disconnecting the tool
will prevent accidental starting, which could
cause serious personal injury.
TO ATTACH BATTERY
PACK (FIG. 1)
FIG. 1
Battery-
Release Button
1. Align the raised rib on the battery pack
with the grooves on the bottom of the
tool, then slide the battery pack onto the
tool.
ASSEMBLY
If any part is broken
Do not attempt to
Your tool should never
OPERATION
CONTENTS
Oscillating multi-tool, HCS wood plunge-cut
blade and instruction manual.
UNPACKING
1. Carefully remove the tool and any
accessories from the carton. Make sure
that all items listed in the packing list are
included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
2. Ensure that the battery-release button on
the battery pack snap into place and the
battery pack is secured to the tool before
beginning operation.
NOTICE: When placing the battery pack
on the tool, be sure that the raised rib on
the battery pack aligns with the groove
on the tool and the latches snap into
place properly. Improper assembly of
the battery pack can cause damage to
internal components.
TO DETACH BATTERY
PACK (FIG. 1)
1. Press the battery-release button to
release the battery pack.
2. Pull the battery pack to remove it from
the tool.
11