Download
Share
Print this page
Baumer CH50I.M8 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Baumer Manuals
  4. Switch
  5. CH50I.M8
  6. Operating instructions manual

Baumer CH50I.M8 Operating Instructions Manual

Io-link hub
Hide thumbs

Advertisement

Quick Links

Download this manual
Operating Manual
CH50I.M8
EN-US
IO-Link Hub

Advertisement

loading
Need help?

Need help?

Do you have a question about the CH50I.M8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Baumer CH50I.M8

Summary of Contents for Baumer CH50I.M8

  • Page 1 Operating Manual CH50I.M8 EN-US IO-Link Hub...
  • Page 2 Indicates a danger with low risk, which could lead to light or medium injury if not avoided. NOTE Indicates a warning of material damage. INFO Indicates practical information and tips that enable optimal use of the devices. Operating Manual CH50I.M8 | V1...
  • Page 3 The present documentation uses the trademarks of the following companies and institutions: IO-Link c/o PROFIBUS User Organisation e.V. (PNO) Specifications Specification Link IO-Link www.io-link.com Version 1.1.2 of 07.2013 INFO The features of IO-Link specification V 1.1.3 are supported. V1 | CH50I.M8 Operating Manual...
  • Page 4 Used electrical and electronic devices may not be disposed of in household waste. The product contains valuable raw materials that can be recycled. There- fore dispose of this product at the appropriate collection point. For additional in- formation visit www.baumer.com. Operating Manual CH50I.M8 | V1...
  • Page 5 At all times, the instruction manual must be made available to the operator at the machine the device is operated at. INFO Any manipulation/modification of hardware and software only qualified Baumer personnel, ex- cept for firmware updates. Intended use The device has been designed and manufactured for: Industrial use.
  • Page 6 Any safety functions in the system are not ensured. only use the device in environments with corresponding IP-rating. only clean the device with oil-free compressed air and a leather cloth. do not use the device as a climbing aid. Operating Manual CH50I.M8 | V1...
  • Page 7 Baumer Description Description Device IO-Link hub (CH50I.M8) IO-Link hub in 30 mm plastic housing 1 x M12 IO-Link Class A 8 x M8 I/O 8 configurable digital inputs/outputs Product name nomenclature The nomenclature is based on a scheme indicating the product functionality.
  • Page 8 24 V US (L+) Pin 2 n.c. Pin 3 0 V US (L-) Pin 4 C/Q IO-Link Pin 5 n.c. X0 ... X7 (mating M8) Pin 1 24 V US (L+) Pin 3 0 V US Pin 4 DIO US Operating Manual CH50I.M8 | V1...
  • Page 9 IO-Link cycle time ≥1 ms VendorID 0x015E DeviceID 0x018A9F Process data 4 bytes (inputs), 2 bytes (out- puts) Sensor supply + Terminal/mating Operating voltage 24 V DC Power supply Per pair of ports (X0+X1, ≤1 A X2+X3, X4+X5, X6+X7) V1 | CH50I.M8 Operating Manual...
  • Page 10 QP: 40 dBμ V/m @ 30 ... 230 QP: 47 dBμ V/m @ 230 ... 1000 MHz EMC-immunity Discharge of static electricity EN 61000-4-2 ±4 kV @ contact (housing) ±8 kV @ air Electromagnetic HF fields EN 61000-4-3 RF-Field 10 V/m (housing) Operating Manual CH50I.M8 | V1...
  • Page 11 57 years data) Product reliability Product reliability MTTF SN 29500 (at 40 °C and rated 94 years data) Mechanical data Mounting data Weight 129 g Dimensions L x W x H 126 x 30 x 34.5 mm V1 | CH50I.M8 Operating Manual...
  • Page 12 Programmable Logic Con- trollers Part 2 2014/30/EU Compliant 2011/65/EU UKCA Compliant 2014/30/EU Compliant REACH No. 1907/2006 SVHC List WEEE 2012/19/EU Compliant ULus E201820 RoHS 2011/65/EU & 2015/863 Exception 6c&7a China RoHS SJ/T 11364-2014 25 EPUP Operating Manual CH50I.M8 | V1...
  • Page 13 Sufficient space to ease replacement and plug-in connections Appropriate installation site in terms of vibration and shock, temperature and humidity (see chapter Technical Specifications) Protected site to prevent connection cables from being torn off accidentally Diagnostic LEDs visible during operation Dimensions V1 | CH50I.M8 Operating Manual...
  • Page 14 Functional ground For EMC compliance, a ring cable lug is required. Input and output shield connection of is via the ring cable lug. Ill. 3: Fastening the ring cable lug Also see about this 2 Accessories [} 32] Operating Manual CH50I.M8 | V1...
  • Page 15 Use a conductive screw to fasten the ring cable lug. c) Slightly tighten the first M4 screw. d) Slightly tighten the second M4 screw. e) Tighten both M4 screws to the specified torque. Also see about this 2 Functional ground [} 14] V1 | CH50I.M8 Operating Manual...
  • Page 16 Risk of fire due to short circuit. Supply lines and/or devices may short circuit when damaged causing overheating and fire. a) Provide intelligent current monitoring or fuse. INFO Maximum length of sensor and actuator cables is limited to 30 m. Operating Manual CH50I.M8 | V1...
  • Page 17 Seal any male and female connectors not in use. Ill. 5: Cable connection 0.4 Nm CAM8.WS9-11238649 0.6 Nm CAM12- W13-11238690 INFO A large selection of connection cables can be found on the Baumer website https:// www.baumer.com. V1 | CH50I.M8 Operating Manual...
  • Page 18 IO-Link in status OPERATE, cyclical data com- Green munication; sensor supply OK On continuous Short circuit DO, temperature warning etc. Flashing at 1 Hz IO-Link communication error Device off, no IO-Link connection present Tab. 1: Indicator IO-Link and US Operating Manual CH50I.M8 | V1...
  • Page 19 Tab. 3: LED indicator digital inputs/outputs Error at input or output In the event of error (short circuit, overload or power recovery) present at minimum one input or output, the LEDs of all input and output slots light up red. V1 | CH50I.M8 Operating Manual...
  • Page 20 Digital Hub DIO 8 M8 0x0015 SerialNumber Consecutive serial number, set by default 0x0016 HardwareRevision e.g. "01.00" 0x0017 FirmwareRevision e.g. "V.1.00.00" 0x0018 ApplicationSpecific-Tag R 16 ... 32 User-specific name, e.g. "System 3 / Port 4" 0x0019 FunctionTag 0x001A LocationTag Operating Manual CH50I.M8 | V1...
  • Page 21 Allows you to read a short cir- – cuit Detection DO cuit being present at a specific channel. Sub-index 1: X0 pin 4 Sub-index 2: X1 pin 4 Sub-index 7: X6 pin 4 Sub-index 8: X7 pin 4 V1 | CH50I.M8 Operating Manual...
  • Page 22 IO-Link master port that does not sup- ply sufficient current for unre- stricted IO-Link hub operation. 0 = No US (L+) current lim- itation 1 = US (L+) current limita- tion enabled at 200 mA Operating Manual CH50I.M8 | V1...
  • Page 23 Sub-index 2: X1 pin 4 Sub-index 7: X6 pin 4 Sub-index 8: X7 pin 4 Setting per channel (sub-in- dex): 0 = 0 ms / OFF 1 = 10 ms 2 = 20 ms 3 = 30 ms V1 | CH50I.M8 Operating Manual...
  • Page 24 For manual reset, change the related process data bit from 0 to 1. 0x0091 Outputs: Fail-Safe Be- Defines the behavior of each havior output (channel) in the event of communication loss with master. Sub-index 1: X0 pin 4 Operating Manual CH50I.M8 | V1...
  • Page 25 Error Overload/short circuit at DIO pin - port 4 pin 2 0x8CAA Error Overload/short circuit at DIO pin - port 5 pin 4 0x8CAB Error Overload/short circuit at DIO pin - port 5 pin 2 V1 | CH50I.M8 Operating Manual...
  • Page 26 Byte 0 Inputs X0 ... X3 Contact Pin4_X0 Reserved Pin4_X1 Reserved Pin4_X2 Reserved Pin4_X3 Reserved Byte 1 Inputs X4 ... X7 Contact Pin4_X4 Reserved Pin4_X5 Reserved Pin4_X6 Reserved Pin4_X7 Reserved NOTICE Bytes 2 and 3 only supported by E0 devices. Operating Manual CH50I.M8 | V1...
  • Page 27 User defined module identification bits, e. g. for tool change applications; 0 = not used 1 ... 255 = ID value is read out from object Process data Digital outputs Byte 0 Inputs X0 ... X3 Contact Pin4_X0 Reserved Pin4_X1 Reserved Pin4_X2 Reserved Pin4_X3 Reserved V1 | CH50I.M8 Operating Manual...
  • Page 28 0 ... 7 Reserved NOTICE Bytes 2 and 3 only supported by E0 devices. Byte 2 Diagnostic tools Global status 0 = No diagnosis 1 = Error Channel X 0 = Channel 1 15 = Channel 16 Operating Manual CH50I.M8 | V1...
  • Page 29 1 ... 255 = ID value read from object Process data Digital outputs Byte 0 Inputs X0 ... X3 Contact Pin4_X0 Reserved Pin4_X1 Reserved Pin4_X2 Reserved Pin4_X3 Reserved Byte 1 Inputs X4 ... X7 Contact Pin4_X4 Reserved Pin4_X5 Reserved Pin4_X6 Reserved Pin4_X7 V1 | CH50I.M8 Operating Manual...
  • Page 30 Operation Baumer Byte 1 Inputs X4 ... X7 Contact Reserved Operating Manual CH50I.M8 | V1...
  • Page 31 The function of the devices is not guaranteed. a) Replace defective or damaged devices. Cleaning the appliance: Only use oil-free compressed air or ethanol Only use non-fibrous materials (e.g. leather cloth) Do not use contact spray V1 | CH50I.M8 Operating Manual...
  • Page 32 10.1.1 Tools Designation Art. no. M8 installation wrench set SW 9 CAM8.WS9-11238649 M12 installation wrench set SW 13 CAM12-W13-11238690 Ill. 6: Assembly wrench INFO PRODUCTS AND ACCESSORIES You will encounter a large product selection at: https://www.baumer.com Operating Manual CH50I.M8 | V1...
  • Page 36 Baumer Germany GmbH & Co. KG Bodenseeallee 7 DE-78333 Stockach www.baumer.com...

This manual is also suitable for:

11261575