Preparations; Connections - Aiwa XR- XR-M150 Operating Instructions Manual

PREPARATIONS

CONNECTIONS

Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord.
• Both speakers can be connected as L (Left) or R (Right).
1 Connect the speaker cord to the main unit.
The speaker cord with the white stripe should be connected
to 0 terminal and the black cord to the 9 terminal.
Right speaker
3
ENGLISH
01-04/XR-M150<U>/Eng
XR-M150
Speaker cord
3
2 Connect the supplied antennas.
Connect the FM antenna to FM 75
antenna to AM LOOP terminals.
N N A
A N T E
A M L
3 Connect the AC cord to an AC outlet.
• The Demo will begin when the AC cord is plugged into an
AC outlet. See page 5 "DEMO" for details.
2
FM antenna
2
Left speaker
10/4/2000, 5:07 PM
terminals and the AM
FM antenna
AM antenna
O O P
AM antenna
3
AC cord