Related Manuals for XtremepowerUS 90154
Summary of Contents for XtremepowerUS 90154
- Page 1 SPA SALT CHLORINATOR SKU: 90154 ELECTRODE REPLACEMENT ASSEMBLY AND USER’S GUIDE 90154 IMPORTANT Review the instruction manual thoroughly before operating the machine. Keep it for future reference.
- Page 3 TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS Legends and Symbols OVERVIEW (PRODUCT INFORMATION) PRODUCT INTRODUCTION PRODUCT OVERVIEW INSTALLATION INSTALLATION INSTRUCTIONS OPERATION STARTUP STANDBY MODE CHLORINATION CYCLE CHLORINE PRODUCTION SCHEDULE ENERGY LEVEL ADJUSTMENT SALINITY MONITORING ELECTRODE LIFE INITIALIZATION ELECTRODE MAINTENANCE PROTECTION MODES TROUBLESHOOTING DISCLAIMER...
- Page 4 IMPORTANT SAFETY INSTRUCTIONS This guide provides instructions for installing and using the SPA Salt Chlorinator. If you have any questions about the equipment, please contact XtremepowerUS. This guide contains important information about safely installing and operating this product. After installation, make sure to share this information with the owner/operator or leave it with them for their reference.
- Page 5 • Use only the provided power supply to prevent damage to XtremepowerUS Spa Salt Chlorinator. • Water temperature must be a minimum of 95° for XtremepowerUS Spa Salt Chlorinator to work. CAUTION • Ensure compatibility with the spa by consulting the manufacturer.
- Page 6 OVERVIEW (PRODUCT INFORMATION) PRODUCT INTRODUCTION XtremepowerUS Spa Salt Chlorinator Electrode Replacement for the XtremepowerUS Spa Salt Chlorinator (90155) seamlessly integrates with portable spas, ensuring continuous, semi-automatic chlorine generation from table salt. This system not only purifies spa water through electrolysis but also enhances softness, contributing to a more comfortable experience.
- Page 7 INSTALLATION INSTALLATION INSTALLATION INSTRUCTIONS NOTE Power Supply Guidelines • Use the included power supply. • Protect the power supply with a weather-resistant cover. • Avoid placing equipment inside the spa compartment. 115 V Electrical Outlet Installation • Ensure a GFCI-protected outlet is available near the spa for safety. •...
- Page 8 OPERATION OPERATION STARTUP • Connect to power: Control box LED flashes 3 times, then enters standby mode. • LED flashes at startup indicate electrode life: 1 lights (below 25% life), 2 lights (25-50% life), 3 lights (50-75% life), and 4 lights (over 75% life). <...
- Page 9 OPERATION ENERGY LEVEL ADJUSTMENT • Hold GENERATING key for 3-5 seconds until buzzer sounds. • Count continuous Salt_Low light flashes every 2 seconds to determine current level. • Exits adjustment mode after three cycles. • Restart at new energy level after adjustment. Level Run Time Per Run Time Per...
- Page 10 TROUBLE SHOOTING TROUBLE SHOOTING Excessive Salt Indication • If both the Green (Salt High) and Red (Salt Low) lights are on, it indicates excess salt. The Chlorinator will shut down to prevent damage. Remove the electrode, press "Boost," and observe the lights. If they remain on, the issue is not with the water itself. •...
- Page 11 DISCLAIMER DISCLAIMER PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor have provided the parts list and assembly diagram in this manual for reference purposes only. They do not make any representation or warranty to the buyer that they are qualified to make repairs to the product or replace any parts of the product. In fact, the manufacturer and/or distributor expressly state that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer.
Need help?
Do you have a question about the 90154 and is the answer not in the manual?
Questions and answers