Page 1
Today, CASADA devices are available worldwide. Continuous development, unmistakable design and a strict focus on improving quality of life are just as much characteristic of CASADA products as reliable and top-class quality. www.casada.com...
Page 2
In order for you to enjoy the benefits of this device for a long time, we would like to ask you, to read and follow the safety instructions carefully. We wish you much pleasure with your personal Skyliner III. Table of contents 1.
Page 3
1. Safety Instructions Please read the following instructions carefully before using your massage chair to ensure that it functions properly and with optimal efficiency. Please keep these operating instructions for further use! • The massage chair conforms to recognised technical principles and the latest safety regulations. •...
Page 4
2. Contraindications If you are unsure whether you should use the massage chair, be sure to consult your doctor. • Use of the massage chair is prohibited during pregnancy or if any of the following complaints are present in the massage area: recent injuries, thrombotic diseases, any kinds of inflammations and swellings or cancer.
Page 5
3. Placement of the Massage Chair Placement Make sure that there is at least 10 cm of space behind the chair so that the chair can be tilted. Protect the chair from excessive room tempera- tures. Position it to avoid direct sunlight and to ensure sufficient distance from heating devices.
Page 6
3. Placement of the Massage Chair Repositioning the Massage Chair Use the castors on the back to move the massage chair. Move the chair by tilting it backwards by about 45° (see illustration). Note: Excessive force will cause the chair to tip over and be damaged.
Page 7
4. Set-up and Assembly Installing the Armrest 1. Switch on the unit and lower the backrest using the remote control. 2. Plug the wiring harness connector and the air line into the side of the steel frame and into the corresponding connectors of the armrest (Figure 1).
Page 8
4. Set-up and Assembly Starting the Calf Mechansim 1. Plug the cable and the air line of the calf mechanism into the respective connector on the front of the steel frame (Figure 1). 2. After connecting, open the cover of the bracket on both sides of the steel frame (Figure 2). 3.
Page 9
5. STUCTURE OF THE CHAIR 5.1 Elements on the massage chair Large cushion Illumination Small cushion Quick control panel Remote control Health scanner Arm air cushion Shoulder mechanism / back cushion Foot section Side panel Shoulder air cushion Illumination...
Page 10
5.2 Functions of the massage chair Shouders Head • Air cushion massage • Speakers Arm (right) Arm (left) • Remote control • NFC inductive charging station • Voice control • USB charging socket • Air cushion massage • Air cushion massage Hands •...
Page 11
5.3 Belt heater Using the belt heater • The chair is equipped with a unique wrap with innovative graphene heating, which not only warms the shoul- ders, but also the back, waist and abdominal area. The user can apply the wrap as needed. When placed over the shoulder, it warms the acupuncture points of Bingfend, Tianzong, Yunmen and Qihu.
Page 12
5.3 Belt heater Illustration showing use for back Illustration showing use for shoulder and waist. and abdomen.
Page 13
5.4 Structure of the remote control Main menu On-/ Off-Button Pause or continue the massage Activates or deactivates the belt heat Activates or deactivates the heating function in the center of the body Activates or deactivates the O2 ion function Activates or deactivates the foot rollers Activates or deactivates calf knead function Activates or deactivates the voice control function...
Page 14
5.4 Structure of the remote control 15. Display of the current status of the massage chair 16. Selection of automatic massage programs 17. Selection of manually adjustable functions 18. Adjusting the position of the seat and the angle of the sitting posture 19.
Page 15
5.5 Structure of the quick control panel 1. On/ Off button Press the button for three seconds to start or switch off the massage chair. Press the button briefly to pause the chair or to switch it to stand-by. 2. Zero Gravity button Press this button to be moved to the zero gravity position.
Page 16
6. Before use Checking Surroundings Make sure that there are no people, pets or objects in the area of the chair. Check gaps Before the massage, make sure that no foreign objects are caught on the legs, feet, etc. Make sure that your hands, feet and head do not get into the area between the lower leg mecha- nism and the main part or between the armrest and the capsule.
Page 17
6. Before use Connect power supply Connect the power cable. Insert the plug into Switch on the main swith the socket. (position „I“) • Please check the power cable and plug for damage before use. • Please use a power source that is in accordance with the operating requirements of this product.
Page 18
7. OPERATING INSTRUCTIONS 7.1 Operate massage chair 1. Press the On/Off button on the side of the remote control or long press the On/Off button on the armrest for the system to start. 2. After starting the system, select the massage intensity by pressing the “Gentle” “Soothing”...
Page 19
7.1 Operate massage chair 4. The chair now scans your body shape. Wait until your body shape check has been fully scanned. You can also press the Skip button or skip the test and start the massage directly. After scanning your body shape, the remote control will give an acoustic signal. The signal alerts you that you can now fine-tune the shoulder position.
Page 20
7.1 Operate massage chair Position to high Perfect position Position to low 7.2 Pause function (Please use this function onl a er switching on the chair [see page 77].) After switching on the massage chair, press the Pause button to pause the massage process. Press the Pause button again to resume the programme.
Page 21
7.3 Automatic programs AI Intelligent - Programs Function Description Total Relax The upper mechanical core is used to massage the neck, shoulders and Fengchi acupoint by kneading. This is followed by tapping and shiatsu to massage the whole body. The lower mechanical core is used to massage the waist and hips by kneading and tapping.
Page 22
7.3 Automatic programs Relaxing and activating - Programs Function Description Meridian Treatment Massage of the shoulders, neck, back and waist using kneading, tapping and shiatsu techniques to treat the meridians. Neck & Shoulder Massages the neck and shoulders mainly with kneading and stretching techniques and the upper back with a medical massage.
Page 23
7.3 Automatic programs Exclusiv for Family - Programs Function Description Power Massage the shoulders, neck, back and waist mainly by kneading, tapping and kneading&tapping. This relieves fatigue, promotes blood circulation and reduces stress through deep massage. The massage intensity is moderate, making it suitable for men.
Page 24
7.3 Automatic programs Overall Relaxation - Programs Function Description Energy Boost Deep massage of the whole body using kneading, tapping and shiatsu techniques to awaken the vitality of the human body and stimulate energy. Lunch Break Massages the back and waist using kneading and tapping techniques while press- ing the Shenyu acupoint.
Page 25
7.4 Remote Control (Please use this function onl a er switching on the chair [see page 77].) Program selection Select the button on the left menu bar to enter the selection menu. You can choose from the following settings: Massagetechnique, Massage Area, 4D intensity, Position, Massage Width und Massage Speed. 1.
Page 26
7.4 Remote control Function Setting the Massage Rollers Stop Press this button for massaging without a technique. Knead Speed and strength can be set. Tap I Speed, width and strength can be set. • Speed can be set at five levels.
Page 27
7.4 Remote control 2. The massage area menu offers you five areas as options: Point-by-Point, Partial, Full, Upper (back) and Lower (back). Select the desired area for the massage. Button Description Fixed point massage Local forwards and backwards massage in a partial area. Full forwards and backwards massage.
Page 28
7.4 Remote control 3. You can set the 4D intensity in the menu. Setting levels 1-5 are available, with 1 being the lowest and 5 the strongest. The higher the 4D intensity is set, the further the massage roller protrudes and the stronger the massage.
Page 29
7.4 Remote control Level 0 Level 1 Level 2 Level 3 Level 4 Level 5 Button Description Press this button to increase the 4D intensity in levels 1 to 5. Press this key to decrease the 4D intensity in levels 1 to 5. Please note: You can also set the 4D intensity with the Plus button or the Minus button n the...
Page 30
7.4 Remote control 4. To set the massage robot, select the arrow pointing upwards or the downward pointing arrow , to fine- tune the massage hand up or down. Select the massage widths as shown in the illustration below. (1) The width can only be set when the user activates the remote control mode when selecting the massage technique or massage area.
Page 31
7.4 Remote control Level 0 Level 1 Level 2 Level 3 Level 4 Level 5 Button Description Press this button to increase the massage width in steps 1 to 5. Press this button to decrease the massage width in steps 1 to 5. Select the massage speed as shown in the illustration below.
Page 32
7.4 Remote control Level 0 Level 2 Level 3 Level 4 Level 5 Level 1 Button Description Press this button to increase the massage speed in steps 1 to 5. Press this button to decrease the massage speed in steps 1 to 5.
Page 33
7.4 Remote control Go to the Manual menu to select the Air mode as shown in the following figure. The air mode includes full back, upper back or lower back. There is also a hand roller massage function on the inside of the arm that automatically turns on when the full body air massage is selected.
Page 34
7.4 Remote control Please note: You can also press the air massage button on the “Home” screen and select the de- sired air massage area from the pop-up menu. (This function is a quick key to the air massage on the current “Home”...
Page 35
7.4 Remote control Level 0 Level 1 Level 2 Level 3 Level 4 Level 5 Button Description Press this key to increase the compression intensity between 1 to 5. Press this key to decrease the compression intensity between 1 to 5. Please note: You can select the Upper Body Air Massage + button or Lower Body Air Mas- sage -...
Page 36
7.5 Adjusting the Chair (Please use this function onl a er switching on the chair [see page 77].) Click on the Angle button in the menu bar on the left side of the screen to enter the settings menu where you can adjust the angle of the chair.
Page 37
7.5 Adjusting the Chair 3. Lengthening or shortening the legrest Button Description Button for shortening the legrest: Shorten the legrest using the remote control. Shortening Press and hold this button to slowly move the legrest upwards. Release the button legrest to stop.
Page 38
Access the main menu of your smart device (e.g., mobile phone). Open Settings and select the Blue- tooth option. Activate the Bluetooth and search for devices in your vicinity. b. The smart device will search for the corresponding Bluetooth name - Skyliner III-XXXX (“X” stands for an individual number). Connect your device to the chair.
Page 39
7.6 Settings 3. Voice control a. Say “Hi Alice” or “Hey Alice” near the left armrest to activate the voice assistant, or alternatively press the voice button on the left armrest. The voice assistant will respond “I am here” to indicate that it is listening.
Page 40
7.6 Settings Voice control Say “Hi Alice” or “Hey Alice” | Answer: I am here. Communication with the voice assistant is in English only. Command Response Massage on Ok, massage on Massage close Ok, massage close Total Relax Ok, Total Relax Energy Boost Ok, Energy Boost Sweet Dream...
Page 41
7.6 Settings 4. Energy-saving mode Energy-saving mode on: The armrest quick buttons and voice control functions cannot be used in energy-sav- ing mode; they must be used when switched on. Energy-saving mode off: The quick buttons on the armrest and the voice control function can also be used in standby mode. 5.
Page 42
7.7 Health detection (Please use this function onl a er switching on the chair [see page 77].) 1. Starting the Health detection a. Click on the Health button in the menu bar on the left side of the screen. To start the health detec- tion, press and then gently place your index finger or middle finger on the sensor.
Page 43
7.7 Health detection 2. Recommended Programm When the normal check is complete, heart rate, blood oxygen and fatigue level are displayed. Blood oxygen is normally in a range between 95% and 99%. Fatigue levels include good, light, moderate and heavy. Based on your fatigue level, an automatic programme is recommended.
Page 44
7.7 Health detection 4. Ending the Health Scan During the health scan, press the button to stop the ckeck process and return to the massage mode running before the check.
Page 45
7.8 User Defined (Please use this function onl a er switching on the chair [see page 77].) Click on the User-Defined button in the menu bar on the left side of the screen. There you select either “Custom- ise 1” or “Customise 2” for the massage. (This is only possible if the corresponding user definition has been set and saved beforehand.) Click either the “Customise 1 edit”...
Page 46
7.9 Other funtions (Please use this function onl a er switching on the chair [see page 77].) On the display under “Home” , select the “Belt heater” button , to switch the heating function of the wrap (graphene heating) on or off. After switching on the heating function, heat will be emitted for 3 minutes.
Page 47
7.9 Other functions On the display under “Home” select the “O2 Ion” button , to switch the O2 ion heating function on or off. On the “Home” screen , click on the “Roller” button , to switch the foot massage function on or off with three adjustable speeds.
Page 48
7.9 Other functions On the display under “Home” , select the “Calf” button , to switch the calf massage function on or off. There is a friction massage function for the inside of the calf and an air cushion massage function for the outside, which can relieve stiffness in the calf muscles or tension caused by standing for long periods of time.
Page 49
7.9 Other function On the display under “Home” , select the “Shoulder” button and press the up and down arrow buttons in the pop-up menu to adjust the shoulder position to a total of 11 levels. On the “Home” screen display , press the “Foot Size”...
Page 50
7.9 Other functions On the “Home” screen display , select the “Massage Time Setting” button . Press the plus and minus arrow button in the pop-up menu to lengthen or shorten the massage time. The time is always shortened or length- ened in 5 minute steps.
Page 51
7.10 Memory (Please use this function onl a er switching on the chair [see page 77].) Click on the “Memory” button in the menu bar on the left side of the screen to access the massage function memories. There are two categories: saving and recall of the massage function. The massage can be saved under “Save I”, “Save II”...
Page 52
7.11 Ending massage During the massage, press the button on the remote control or the button on the right armrest to switch off the unit. All massage functions are ended, and the chair is reset to its starting position. All massage functions are automatically switched off when the massage time has elapsed;...
Page 53
8. MAINTENANCE 8.1 Cleaning and maintenance Cleaning synthetic leather and plastic parts Wipe the synthetic leather with a soft, dry cloth. • Do not use chemicals such as thinner, petrol, alcohol, etc. to clean the unit. • When using commercially available leather care products (cloths), please adhere to the instructions for use. •...
Page 54
If you have any questions or concerns about this product, please contact the service personnel. Technical details Model: Skyliner III Dimensions: Upright: 85,5 x 177 x 130 cm Reclining: 85,5 x 190 x 90,5 cm Weight:...
Page 55
9. Specials ROLLING SOLE ROLLER Pleasant alternation between relaxation The foot massage stimulates the nerve and releasing the muscles – also endings and certain organs of the body, perfectly suited for a final massage, for which also relaxes the muscles. relaxation and recovery of the muscles.
Page 56
9. Specials ADJUSTABLE PILLOW SHIATSU If necessary, the double cushion can be Shiatsu (finger press) is a form of body placed to reduce the neck and shoulder therapy originating in Japan. The massage intensity. massage technique consists of soft, rhythmic, far-reaching stretches and rotations.
Page 57
9. Specials HUMAN HANDS FEELING SLIM LCD TOUCH SCREEN REMOTE CONTROL Specially designed massage heads im- itate the hand motion of a professional Using the touch screen, you can select masseur. The maximum stretch space is your desired massage comfortably 6,5 cm, and the maximum stretch angle and adjust all other settings.
Need help?
Do you have a question about the Skyliner III and is the answer not in the manual?
Questions and answers