Doss SoundBox Pro+ P400 Quick Start Manual page 3

7. Pairing your device via Bluetooth
1. Enable the Bluetooth feature on your device.
2. Find " SoundBox Pro+ P400 " on the Bluetooth device and connect it.
3. Once paired, you can see the status "connected" on your device.
Press and hold the
can't find SoundBox Pro+ P400 in 10 seconds.
8. TWS (True Wireless Stereo) mode
1. Turn on both speakers and make sure they're in the Bluetooth disconnect state.
2. Press and hold the "ADD" button 3s of one of the speakers to enter the TWS
mode. The indicator will flash white rapidly left and right. At this time, the other
speaker will pair with it automatically.
3. After completing the TWS pairing, the host speaker's indicator will turn solid
white on the left, while the other speaker's indicator will turn solid white on the
right.
4. Find " SoundBox Pro+ P400 " on your Bluetooth device and connect it.
9. Use your speaker with Echo Dot
You can connect the Dot to the speaker via Bluetooth.
Please follow the steps to set up via Bluetooth:
1. Download the Alexa app and follow the steps to set up the procedure to get
the Dot connected to your home Wi-Fi network.
2. Switch the SoundBox Pro+ P400 to Bluetooth mode, you can press the power
button to re-enter Bluetooth pairing.
3. Run the Alexa app, tap Menu, and then tap Settings.
4. Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
5. The SoundBox Pro+ P400 should appear in the list of Bluetooth devices. If
not, please press the power button and try again.
6. Once listed, tap on the speaker to complete the pairing process.
7. To remove the device, return to Bluetooth＞tap the name of the speaker＞
tap "Forget Device"
Note:
Voice command will not be able to turn on/off the speaker if you connect to it
via Bluetooth.
Warning
• DO NOT drop, hit or shake the speaker.
• DO NOT disassemble, repair or modify the speaker by yourself.
• DO NOT use cleaning products that contain benzene, solvents or alcohol.
• DO NOT expose the speaker to excessive heat or direct sunlight for a long time.
• DO NOT store the speaker in a place with humidity or dust.
• DO NOT place heavy objects on top of the speaker.
• DO NOT use the speaker near a microwave oven or wireless LAN products
Notice
This product complies with the radio interference requirements of the
European Community.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED
This symbol means the product must not be discarded as household
waste, and should be delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment. For more information on disposal and
recycling of this product, contact your local municipality, disposal service, or the
shop where you bought this product.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada's licence-exempt
RSS(s)Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment should be installed and operated with a minimum distance of
20 cm between the radiator and your body.
Le présent appareil est conforme aux CNR d'industrie Canada applicablesauxap-
pareils radio exempts de licence. L'exploitation est autorisée aux deuxcondi-
tions suivantes : (1)I'appareil ne doit pas produire de brouillage, et(2)I'utilisa-
teur de l'appareil doit accepter toutbrouillage radioélectrique subi,mÃême si le
brouillage est susceptible d'en compromettre lefonctionnement.CAN
ICES-3(B)/NMB-3(B)
L'ap pareil a été évalué pour répondre aux exigences générales d'exposition
auxRF. Le dispositif peut être utilisé sans restriction dans des conditions
portativesd'exposition.
Cetéquipement doit étre installé et utilisé à une distance minimale de 20
cmentre le radiateur et votre corps.
button 2s to re-enter Bluetooth pairing if your device