Shift Adjustment; Maintenance; Care - SRAM SPECTRO S7 Specification

Shift adjustment / Maintenance / Care
S H I F T A D J U S T M E N T
Be sure to reset rotational
shifter from 5th. to 4th gear.
Match up the marks in the
Clickbox viewing window by
turning the adjusting screw (1,
Fig. 6). Check this setting from
time to time.
6
M A I N T E N A N C E / C A R E
Caution:
• Brake pads resp. cylinders,
brake cables, shifting cables,
handlebar grips, sprockets
and bicycle chains are
wearing parts. Control this
parts regularly and replace in
time.
• If the coaster brake is loaded
excessively its effect can be
too strong, the hub may lock.
In such a case the brake shell
should be lubricated with a
special grease (this should be
done by a professional only).
1
• Do not use high-pressure
water when cleaning the gear
hub (e.g. strong water jets,
high-pressure cleaners etc.) –
if water penetrates it could
lead to functional problems.
• Do not use solvants or corrosive
materials to clean the compo-
nents.
• When using the bike during the
winter more frequent cleaning
is necessary to prevent damage
caused by de-icing salt.
• Clean dirty chains before
oiling. Do not use any grease-
dissolving or acidic agents.
Cleaning agent must be rinsed
off after a few minutes with
water. Apply oil after chain is
completely dried.