Download Print this page
Marantz SA-KI-PEARL Service Manual
Marantz SA-KI-PEARL Service Manual

Marantz SA-KI-PEARL Service Manual

Super audio cd player
Hide thumbs Also See for SA-KI-PEARL:

Advertisement

Available languages

Available languages

Quick Links

Service
Manual
FEATURES
This unit can play back the outstanding sound performance of
Super Audio CDs. This unit has the following major features.
SECTION
• Low-noise low-distortion filter circuit and high-
1. TECHNICAL SPECIFICATIONS ........................................................................................... 1
speed HDAMSA2-type output amplifier with the
2. SERVICE HINTS AND TOOLS ............................................................................................. 4
differential input type HDAM
3. WARNING AND LASER SAFETY INSTRUCTIONS ............................................................ 5
4. CAUTIONS ........................................................................................................................... 6
• Playback of CD-R/CD-RW discs
5. UPDATA FIRMWARE PROCEDURE .................................................................................... 8
6. SERVICE MODE ..................................................................................................................15
• Playback of CD-R/CD-RW/CD-ROM discs
7. HOW TO THE RESET OF PLAYBACK TIME ......................................................................17
containing WMA and MP3 files
8. ERROR MESSAGE .............................................................................................................18
9. TROUBLESHOOTING ....................................................................................................... 25
• Toroidal transformer
10. WARNING DIAGRAM ..........................................................................................................27
The SA-KI-PEARL features a toroidal transformer that
11. BLOCK DIAGRAM .............................................................................................................. 29
produces less vibration and magnetic leakage flux compared
12. SCHEMATIC DIAGRAM ......................................................................................................31
to conventional power transformers. The materials and
13. PARTS LOCATION ............................................................................................................. 43
manufacturing process of the ring-shaped core are strictly
14. EXPLODED VIEW AND PARTS LISTA .............................................................................. 53
controlled to reduce vibration, while the short-ring attached to the
15. MICROPROCESSOR AND IC DAT .....................................................................................57
perimeter of the transformer reduce magnetic leakage flux.
16. ELECTRICAL PARTS LIST ................................................................................................ 64
17. ABOUT REPLACE THE MICROPROCESSOR WITH A NEW ONE ............................... 75
• Equipped with highly-selected audio parts
Please use this service manual with referring to the user guide ( D.F.U. ) without fail.
The unit comes with the same custom power block capacitor
used in the SA-7S1. The unit's power rectifier diode and
regulator are also top-of-the-line.
• Copper-plated chassis
OPEN/
CLOSE
• Headphone circuit component upgrade
TABLE OF CONTENTS
The unit comes with a fully discrete headphone output circ
and we've upgraded the circuits and components from t
highly acclaimed SA-15S1 for improved audio texture a
expressiveness.
• DAC Mode
By connecting devices with digital outputs, such as C
transports or MD recorders, to the unit's DIGITAL AUDIO
terminal, the unit can be used as a D/A converter.
You can further enhance music tracks by playing them throu
the unit's high-performance, high-sound-quality circuits.
• Double-layered chassis
• High-grade machined analog audio outp
SA-KI-PEARL
SA-KI-PEARL /
Super Audio CD Player
PLAY
STOP
PAUSE
connectors
N1B/U1B
ENGLISH
PAGE
Part no. 90M36AK855010
First Issue 2009.03
MZ

Advertisement

loading
Need help?

Need help?

Do you have a question about the SA-KI-PEARL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Marantz SA-KI-PEARL

  • Page 1 You can further enhance music tracks by playing them throu • Toroidal transformer 10. WARNING DIAGRAM ......................27 the unit's high-performance, high-sound-quality circuits. The SA-KI-PEARL features a toroidal transformer that 11. BLOCK DIAGRAM ......................29 produces less vibration and magnetic leakage flux compared 12. SCHEMATIC DIAGRAM ......................31 •...
  • Page 2 MARANTZ Parts for your equipment are generally available to our National Marantz Subsidiary or Agent. ORDERING PARTS : Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specified.
  • Page 3 1. TECHNICAL SPECIFICATIONS Super Audio CD ENGLISH Audio Characteristics Analog output Channels 2 channels 2 channels Frequency range 2 Hz — 100 kHz 2 Hz — 20 kHz Frequency characteristics 2 Hz — 50 kHz (-3 dB) 2 Hz — 20 kHz (-0.15 dB) IONAL DRAWINGS Dynamic range 112 dB...
  • Page 4 ENGLISH FEATURES FEATURES • Hybrid Layer Disc APPLICABLE DISCS TO THE UNIT Not only does this disc contain both high sound quality stereo area and high sound quality multi-channel area** information, 1. Super Audio CD • Hybrid Layer Disc APPLICABLE DISCS TO THE UNIT it also has a CD layer in the second layer, so it can be played Not only does this disc contain both high sound quality stereo on a CD player.
  • Page 5 本機の特長 各 部 また、各々のタイプは、情報が記録される 2 つの領域、 本機の特長 の 本機で再生できるディスクについて •  高音質ステレオエリア 名 各 称 部 •  高音質マルチチャンネルエリア**  また、各々のタイプは、情報が記録される 2 つの領域、 1. スーパーオーディオ CD の 本機で再生できるディスクについて を持つことができます。 •  高音質ステレオエリア 名 •  シングルレイヤー ・ ディスク 称 •  高音質マルチチャンネルエリア**  1. スーパーオーディオ CD   高音質ステレオと高音質マルチチャンネル ** の両方の情報 を持つことができます。 エリアを持つことができます。...
  • Page 6 2. SERVICE HINTS AND TOOLS SERVICE HINTS SERVICE TOOLS Audio signals disc 4822 397 30184 or TCD-784 Disc without errors + Disc with DO errors, black spots and fingerprints 4822 397 30245 (SBC444A) or TCD-726 Disc (65 min 1kHz) without no pause 4822 397 30155 Max.
  • Page 7 3. WARNING AND LASER SAFETY INSTRUCTIONS WARNING WAARSCHUWING All ICs and many other semi-conductors are Alle IC’s en vele andere halfgeleiders zijn susceptible to electrostatic discharges (ESD). gevoelig voor elektrostatische ontladingen Careless handling during repair can reduce (ESD). life drastically. Onzorgvuldig behandelen tijdens reparatie When repairing, make sure that you are kan de levensduur drastisch doen...
  • Page 8 4. CAUTIONS [A] TAKING THE DISC OUT OF EMERGENCY Remove the top cover of the player. Remove the cover of Loader. Remove 2 screws shown in the picture follows. Remove the disc clamper. Now you can remove the disc. 取り外し、組み立て時の注意 [B] CAUTIONS IN ASSEMBLING AND (M002) DISASSEMBLING (M002)
  • Page 9 取り付け時の注意事項 [C] PRECAUTIONS TO OBSERVE IN INSTALLING [C] LOADER UNIT THE LOADER UNIT 修理時 を後から取り付ける際は、コンタクター Due to the contactor (021B) being deformable, when LOADER UNIT が変形しやすいため、下記の手順で を取 (021B) LOADER UNIT installing the loader unit at the time of repair, please follow り付けてください。...
  • Page 10 5. UPDATE FIRMWARE PROCEDURE 5. UPDATE FIRMWARE PROCEDURE [A] Update Front CPU's software to internal Flash- [A] Update Front CPU's software to internal Flash- ROM. ROM. このモードはフロントマイコンの更新用です。 • • This mode is to update the software for Front CPU’s. の のマイコン内部のフラッシ...
  • Page 11 の を接点を上にして、本機のリア Connect FPC (upside contact) to the rear panel of the DATA UPDATE KIT パネルに接続します。 unit from DATA UPDATE KIT 本機に電源ケーブルを接続します。 Connect the mains cord into the unit. をダブルクリックし、 を起動しま Double click the FlashSta.exe. And launch the M16 Flash FlashSta.exe Flash Start す。...
  • Page 12 の にチェックをし Internal flash memory Check the Internal flash memory in the Select Program. Select Program て下さい。 Choose the COM Port number. 使用する ポート番号を選択します。 And click the OK. をクリックします。 をクリックします。 Click the Refer..Refer...
  • Page 13 を選択し、 をクリックします。 Open. SACD_yymmdd.mot Open Choose the SACD_yymmdd.mot. And click the 注意 は年の下二桁、 は月、 は日 : yy NOTE : The yy is two digits of year. The mm is month. The dd is date. (KI-13S2) と は自動的に記入され、 は が選 The FilePath and ID are inputted automatically, and the FilePath MCU Type ばれます。...
  • Page 14 をクリックします。 E.P.R..E.P.R... Click the をクリックします。 Click the...
  • Page 15 ソフトウェアが の内部フラッシュ に書き込 Software is written into the internal Flash-ROM of Front Front CPU まれます。 CPU. 書き込みにかかる時間は約 分です。 The writing of software takes about 1 minute. をクリックします。 Click the をクリックします。 Click the Exit. Exit 本機から電源コードを外します。 Disconnect the mains cord. 本機から の...
  • Page 16 [B] UPDATE FIRMWARE FOR Super Audio CD [B] UPDATE FIRMWARE FOR Super Audio CD MODULE MODULE NECESSARY EQUIPMENT NECESSARY EQUIPMENT • Update Disc (90M-KI13S2CDR) • Update Disc (90M-KI13S2CDR) WRITING PROCEDURE WRITING PROCEDURE 本機に電源コードを接続します。 Connect the mains cord into the unit. 本機の電源を入れます。...
  • Page 17 6. SERVICE MODE 6. SERVICE MODE 電源コードを接続します。 Insert mains cable plug in the outlet. ボタンと ボタンを押しながら POWER ON/OFF button While pressing 2. g/i STOP POWER ON/ Press the ボタンを押します。(以下、表示例は英文項の図を参 g/i and STOP button. 照) に機種名が表示されます。 Model name is displayed. DISPLAY SA13/KI ボタンを押します。戻るには...
  • Page 18 のバックアップされた時間が表示されます。 [A] DISPLAYにCD再生時間(総合計)が表示されます。 [B] CD [A] CD playback time is displayed. [B] CD backup time is displayed. Press PLAY button FIL 1 2 3 N SHP RNDM STEREO EXT CLK 44.1K 88.2K 176.4K FIL 1 2 3 N SHP RNDM STEREO EXT CLK 44.1K...
  • Page 19 再生時間のリセット(初期化)方法 7. DISC 7. HOW TO THE RESET OF PLAYBACK TIME 新しい 部 CD MECHANISM [ 001M or M002 ] (TRAVERSE When replacing CD MECHANISM [ 001M or M002 ] に交換した場合、次の手順で 再生時間をリセット(初期 (TRAVERSE Block), please reset Playback time (total) in the DISC 化)してください。...
  • Page 20 エラーメッセージ 8. ERROR MESSAGE エラーメッセージ(各モデル共通)には、ラストエラーメッセ This test mode is common to all models. ージとその他のエラーメッセージがあります。 ラストエラーメッセージなどを確認するモード [A] The mode to check the last error message etc. "Stop" + "NEXT" + "Power On" Model name is displayed モデル名表示 SA-13/KI STOP Previous j/h STOP(3s) Last Error Message Clear...
  • Page 21 エラーレート 2. Error Rate のエラーレートを測定します。 に関 This function determines the CD error rate. For SUPER SUPER AUDIO CD しては、参考値となります。 AUDIO CDs, it only displays reference values. FIL 1 2 3 N SHP RNDM STEREO EXT CLK 44.1K 88.2K 176.4K Display A- B 1 PROG M FILE...
  • Page 22 FIL 1 2 3 N SHP RNDM STEREO EXT CLK 44.1K 88.2K 176.4K Display A- B 1 PROG M FILE STRG D OFF REMAIN SUPERAUDIOCD % % A v およそ 秒単位で現在のエラーレートを表示します。 A current error rate will be displayed for approximately 3 尚、表示中の"...
  • Page 23 FIL 1 2 3 N SHP RNDM STEREO EXT CLK 44.1K 88.2K 176.4K Display A- B 1 PROG M FILE STRG D OFF REMAIN SUPERAUDIOCD O p e n x x x % > ボタンを押すと ステップで加算され、 ボ Press the PLAY button, and the number goes up at a 1 PLAY PAUSE タンを押すと...
  • Page 24 その他のエラーメッセージ [B] Other Error Message page 全モデル共通のエラーメッセージ The error message common to all models ラストエラーメッセージにて表示されるエラーメッ 1. The error message displayed as the Last Error セージ Message とフロントマイ SUPER AUDIO CD Module (pwb K001) Communication error between SUPER AUDIO CD コンとの通信エラー Module (pwb K001) and Front Microprocessor との通信エラーが...
  • Page 25 通信が行われているか確認してください。 STOP to PLAY. 通常動作が行われている状態で、当エラーが解消できない If the error cannot be corrected through normal 場合、 が壊れている可能性があります。 Q551 operations, Q551 may be broken. If such is the case, を交換してください。 Q551 replace Q551. ラストエラーメッセージにて表示されないエラーメ 2. Error messages that are not displayed in the ッセージ...
  • Page 26 If neither of the display nor the DISPLAY OFF (LED) の電圧かどうか確認してください。 responds, the unit may have recognized the unit as another model. In either case, check if TPF85 and TPF86 on PU16 receive designated voltages. QF06 PU16 SA-KI-PEARL/SA-13S2 58pin TPF85 1.1 V~2.2 V 60pin TPF86 0 V~1.1 V 電圧に問題がなく...
  • Page 27 トラブルシューティング 9. TROUBLESHOOTING ディスクが再生できない [1] Discs cannot be played back エラー表示あり An Message is displayed エラーメッセージ"の項を参照ください。 Refer to "8. ERROR MESSAGE". " エラー表示なし No Error Message 又は のどちらかのディスクが再生で SUPER AUDIO CD Either CDs or SUPER AUDIO CDs cannot be played きない...
  • Page 28 Personal notes:...
  • Page 29 10. WIRING DIAGRAM SUPER AUDIO CD TRAVERSE MECHA M002 LOADER UNIT M001 J001 L004 L002 WM03 WM02 JM03 JM04 L001 WM04 JM01 JM05 JM02 WM01 JM06 WM05 PF16 W003 JH01 L012 J801 W604 J607/J606 JH02 002M J850 J604 W605 J605 L004 J803 WM04...
  • Page 30 11. BLOCK DIAGRAM CONTROL MPU RC-5 from EXT FRONT PANEL FILTER & BUFFER RC-5 (RC-5) (Display off, SIDE LED) 11pin(SDA) KEYS Display : LCD PLAY, STOP, PAUSE, NEXT, 10pin(SCL) HDAM LPF COAX KEYES FDAT, FCLK, FCEN BACK 13pin(RST) L. OUT and AMP FREST, F_RS S-MODE, OPEN/CLOSE, INV...
  • Page 31 12. SCHEMATIC DIAGRAM PF16 PWB WM05 JM05 SMCD-17P 17FMN-SMT QM07 TC7WH241FU MCLK/- MCLK/- LRCK/- LRCK/- PCM/SA_L +3.3V PCM/SA_L +3.3V -/SA_R -/SA_R CM05 WM06 CM06 JM06 BCK/SACK BCK/SACK 0 . 1 u SMCD-25P 25FMN MCLK/- D_SO RM10 PCM/SA_L D_SCLK D_CS1 D_CS2 LRCK/SA_R BCK/SACK DSDPCM...
  • Page 32 Logic Device SEL2 MSDAT PCM/SA_L +3.3V C403 0 . 1 u R415 J404 FMN-BMTTN JF00 R417 SA-KI-PEARL MODEL SELECT SA-15S2N SA-15S2F - - - - - - - - - SA-13S2 C913 C914 C404 C405 0 . 1 u 1000p 0 .
  • Page 33 PP16 PWB 1/2 J501 10PL-FJ P_DET R653 D657 2SC2705 R670 +12V Q658 O / Y R659 3 . 3 k 2SA970 Q662 D658 Q923 +11VA R922 CD/DIR 2SC2458 1 . 8 k C660 R651 R654 6 . 8 k C652 470u Q655 RC5F...
  • Page 34 PP16 PWB 2/2 3.3V 3.3V JT03 LT06 GP1FAV31RK0F BL02RN2 JT02 RT08 DIGTAL IN GP1FAV31TK0F 361G CUPER SHILD HOUSING LT05 BL02RN2 OPT. OPT. LT04 BL02RN2 0 . 1 u CT10 CT09 0 . 1 u 220u DIGITAL OUT JT04 QT01 CT14 MC74HCU04ANG RT09 SF51...
  • Page 35 PH16 PWB +11VA R953 5 . 6 k C903 Q953 W902 J902 2SC34116 +11VA 6P PH-PH S6B-PH-SM3-TB R952 +11V R956 Q951 -11V 2SA1586 -11VA R981 C905 L901 L_VOL C951 0 . 1 u R957 YKB21-5834N R958 J903 C904 100k R910 R_VOL 1000p Q952...
  • Page 36 FRONT CKT(KEY,RC-5 & DISPLAY) PY26 PWB WY01 JY01 SMCD-17X120 17FMN-SMT +5VF FRONT SIDE LED KEY1 KEY1 (RIGHT) S_LED KEY2 KEY2 KEYS(FRONT RIGHT) KEY3 KEY3 SY01 D_OFF CY03 SKHVBF F0052759M DOFF 0 . 1 u DY01 I/E_LED KEY2 RY06 INVERR SEL2E10C S_OFF RY01 PLAY...
  • Page 37 13. PARTS LOCATION PU16 AA PWB C401 D3 CF11 A3 R416 D3 RF09 C4 C402 D4 CF12 A2 R417 D3 RF10 C2 C403 E3 CF13 A2 R500 C5 RF11 B2 C404 D3 CF25 C4 R501 D6 RF12 C4 C405 D2 J401 E2 R502 C5 RF13 B3...
  • Page 38 PF16 AA PWB PP16 AB PWB C551 B15 D609 E14 LF53 K5 R607 D12 RF51 K5 C552 B14 D610 E14 LN21 K14 R608 C13 RF53 L4 C553 B14 D652 E15 LT01 K6 R609 D13 RF54 K4 C554 B13 D653 E15 LT04 J8 R610 D13 RF55 K4...
  • Page 39 PP16 AB PWB 鉛フリー半田 半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu).
  • Page 40 PY16 AA PWB CY06 C3 JY06 B1 RY29 B5 CY07 C3 JY09 B5 RY30 B5 CY08 C3 JY10 A1 RY31 B5 CY09 B4 LY42 C7 RY32 B5 CY10 B4 LY43 B6 RY33 B5 CY11 B6 QY11 C2 RY35 B7 CY12 B5 QY21 B4 RY36 B7 CY13 B5...
  • Page 41 PY46 AA PWB SUPER AUDIO CD PWB K001 CY29 B1 CY30 B1 DY07 B2 DY08 B2 JY08 B1 RY46 B2 RY47 B2 PH16 AA PWB C903 D2 R951 A3 C904 B2 R952 C2 C905 C2 R953 C2 C923 D2 R954 B2 C924 B1 R955 B2 C925 B2...
  • Page 42 14. EXPLODED VIEW AND PARTS LIST 103D 5127 Ø3X8(M) 118D 5150 105D 5128 Ø3X8(M) 5128 Ø3X4(U) Ø3X8(M) 5146 100D 124D Ø3X6(M)x4 LOADER UNIT M001 U VERSION 110Dx2 M002 5128 N VERSION 112Dx3 Ø3X4(U)x4 109D 151B 103D 101D 150B 5128 SUPER AUDIO CD TRAVERSE MECHA Ø3X4(U) M002 W001...
  • Page 43 PACKING CASE SA-KI-PEARL 015S /N1B 531210082006M MASS CARTON MASTER CARTON SA-KI-PEARL J051 00MZD00900100 CONN. CORD CINCHI CORD RC-5 0.9M J082 00D2032441004 CONN. CORD 2P PIN CORD NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 44 LOADER 995684000070S 995684000070S MOTOR MOTOR ASSY (14 and 18) SW10-3001-00 NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS. NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 45 15. MICROPROCESSOR AND IC DATA QF01 : R5F212AASNFP Pin Port Mode STBY Initial Function SA7003 SA8003 1 P3_3 LCD_RS LCD SELECTION REGISTER 2 P3_4 IIC DATA 3 MODE MODE IPOD ATTESTATION IC RESET OUTPUT 4 P4_3 IPOD_RESET SIGNAL CHANGE OUTPUT POWER OF 5 P4_4 SACD_DIR SACD AND DIR...
  • Page 46 QF01 : R5F212AASNFP Pin Port Mode STBY Initial Function SA7003 SA8003 40 RXD2 USB_SI USB IC COMMUNICATION DATA INPUT 41 TXD2 USB_SO USB IC COMMUNICATION DATA OUTPUT USB IC COMMUNICATION REQUEST 42 P3_1 USB_RTS OUTPUT 43 P3_0 USB_RESET USB IC RESET OUTPUT 44 P3_6 USB_STBY_B USB IC STANDBY CONTROL OUTPUT...
  • Page 47 Q401 : EPM3032A (Programmable Logic Device) Pin Name Name/Usage Pin No. Dir. I/O Standard Voltage User Assignment input 3.3-V LVTTL N For PLD writing SEL2 RESERVED_INPUT RESERVED_INPUT GNDIO SYCL SMLCK output 3.3-V LVTTL Y Master Clock output LRCK/SAR SWCLK output 3.3-V LVTTL Y Word Clock output input...
  • Page 48 gle 3.3V-power supply operation. TTL input port supports 5V interface. opts small SQFP48 package for efficient use of substrate mounting area. n Assignments Q501 : LC89057W-VF4 35 34 33 32 31 30 29 28 27 26 25 SDIN SLRCK SBCK RDATA XMODE RLRCK...
  • Page 49 LC89057W-VF4 5. Pin Functions Q501 : LC89057W-VF4 Table 5.1 Pin Functions Pin No. Name Function RXOUT Output pin of Input bi-phase selection data Input pin of TTL-compatible digital data Digital data input pin with built-in amplifier that supports coaxial Input pin of TTL-compatible digital data Input pin of TTL-compatible digital data DGND Digital GND...
  • Page 50 CS4398 Q551 : CS4398 120 dB, 192 kHz Multi-Bit DAC with Volume Control Features Advanced Multi-bit Delta-Sigma Architecture Direct Stream Digital (DSD) – 120 dB Dynamic Range – Dedicated DSD Input Pins – -107 dB THD+N – On-Chip 50 kHz Filter to Meet Scarlet Book SACD Recommendations –...
  • Page 51 CS4398 1. PINOUT DRAWING Q551 : CS4398 DSD_B DSD_A DSD_SCLK SDIN SCLK AMUTEC LRCK AOUTA- MCLK AOUTA+ DGND AGND M3 (AD1/CDIN) AOUTB+ M2 (SCL/CCLK) AOUTB- M1 (SDA/CDOUT) BMUTEC M0 (AD0/CS) VREF REF_GND CS4398 FILT+ Pin Name Pin # Pin Description Figure 1.
  • Page 52 16. ELECTRICAL PARTS LIST PARTS INFORMATION NOTE ON SAFETY FOR FUSIBLE RESISTOR : The suppliers and their type numbers of fusible resistors RESISTORS are as follows; 1) 00MGD05 × × × 140, Carbon film fixed resistor, ±5% 1/4W 1. KOA Corporation 2) 00MGD05 ×...
  • Page 53 00MNN05471610 CHIP RES. 470 OHM +-5% 1/16W PH16 R972 00MNN05560610 CHIP RES. 56 OHM +-5% 1/16W PH16 R973 00MNN05562610 CHIP RES. 5.6K OHM +-5% 1/16W NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 54 ROS-16V 221M -H5#PE - T2 (220UF 16V) PP16 D602 00MHD20002000 DIODE 1SS133 T-77 PP16 D603 00MHD20002000 DIODE 1SS133 T-77 PP16 D604 00MHD20002000 DIODE 1SS133 T-77 PP16 D605 00MHD20002000 DIODE 1SS133 T-77 NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 55 00MFC90050130 00MFC90050130 FERRITE CORE BL02RN2-R62T2 FERRITE BEAD PP16 L103 00MFC90050130 00MFC90050130 FERRITE CORE BL02RN2-R62T2 FERRITE BEAD PP16 LF51 00MFC90050130 00MFC90050130 FERRITE CORE BL02RN2-R62T2 FERRITE BEAD NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 56 PP16 QN02 00MHT30001000 00MHT30001000 TRS. C2458 C1740S C3199 ETC. PP16 QN03 00MHT30001000 00MHT30001000 TRS. C2458 C1740S C3199 ETC. PP16 QN04 00MBA20004000 00MBA20004000 TRS. DTC114TS/UN4215 10K NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 57 4.7K OHM +-5% 1/6W PP16 R851 00MGD05181160 RES. 180 OHM +-5% 1/6W PP16 R852 00MGD05181160 RES. 180 OHM +-5% 1/6W PP16 R853 00MGD05104160 RES. 100K OHM +-5% 1/6W NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 58 C404 00MDK98104200 CER. CAP. GRM39F104Z16 0.1UF PU16 C405 00MOA107010R0 ELECT CAP. ROA-10V 101M -G3#PE - T2 (100UF 10V) PU16 C406 00MEY10700620 00MEY10700620 ELECT CAP. 100UF/6.3V NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 59 00MNN05103610 CHIP RES. 10K OHM +-5% 1/16W PU16 R417 00MNN05470610 CHIP RES. 47 OHM +-5% 1/16W PU16 R500 00MNN05101610 CHIP RES. 100 OHM +-5% 1/16W NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 60 1000 PF +-10% B 50V GR36 PY16 CY14 00MDK96102300 CER. CAP. 1000 PF +-10% B 50V GR36 PY16 CY15 00MDK96102300 CER. CAP. 1000 PF +-10% B 50V GR36 NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 61 SKHVBF 260GF RED PY26 SY02 00MSP01012030 00MSP01012030 PUSH SW SKHVBF 260GF RED PY26 SY03 00MSP01012030 00MSP01012030 PUSH SW SKHVBF 260GF RED KEY2 PWB PY36 (00MWG35AK203-) NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 62 00MHI10042080 L E D 00MHI10042080 L.E.D. SECT1E01C-S SECT1E01C-S PY46 RY46 00MNN05103610 CHIP RES. 10K OHM +-5% 1/16W 00MNN05103610 CHIP RES. 10K OHM +-5% 1/16W PY46 RY47 NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
  • Page 63 17. ABOUT REPLACE THE MICROPROCESSOR WITH A NEW ONE When replaced of the µ-PRO (Microprocessor) or the Flash ROM, confirm contents of the following. Pos. After Description Remark Name replaced PU16 QF01 R5F212AASNFP (WITH PROGRAM) After replaced A : Mask ROM (With software). No need write-in of software to the microprocessor. B : Flash ROM (With software).

This manual is also suitable for:

Sa-ki-pearl n1bSa-ki-pearl u1b