Service DV4003 / K1SG/N1SG /N1B/U1B Manual DVD Player DVD PLAYER DV4003 STOP OPEN/CLOSE PLAY/PAUSE STANDBY PROGRESSIVE SCAN POWER ON/STANDBY AUDIO EX TABLE OF CONTENTS SECTION PAGE 1. TECHNICAL SPECIFICATIONS ..................1 2. SERVICE HINTS AND TOOLS ..................6 3. WARNING AND LASER SAFETY INSTRUCTIONS ............7 4.
Page 2
MARANTZ Parts for your equipment are generally available to our National Marantz Subsidiary or Agent. ORDERING PARTS : Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specified.
• ENGLISH Additional Information 1. TECHNICAL SPECIFICATIONS • General Specifi cations 21-pin connector assignment ENGLISH (Europe model only) System ..... DVD-Video, DVD±R/RW, Video CD, CD, 21-pin connector assignment [/N : Europe model only] AV connector output ......21-pin connector General MP3 files, JPEG files, DviX, WMA and USB AV connector output ........
Page 5
ENGLISH Before You Start Features MP3 and WMA* compatibility This player is compatible with CD-R, CD- USB Operation RW and CD-ROM discs that contain MP3 You can play or view the data fi les (JPEG, and WMA audio tracks (see pages 27, 29). ®...
Please confi rm that the following not play. remote control: *The DV4003 does not support the non-DVD side accessories are in the box when you open of a Dual Disc. • Make sure that there are no obstacles between...
ENGLISH Before You Start General information for • Always be sure to specify a fi le extension of “.JPG” or “JPEG” for JPEG fi les. The fi le will not be able MP3/WMA/JPEG/DivX to be displayed if a fi le extension other than “.JPG” •...
2. SERVICE HINTS AND TOOLS SERVICE HINTS SERVICE TOOLS Audio signals disc 4822 397 30184 or TCD-784 Disc without errors + Disc with DO errors, black spots and fingerprints 4822 397 30245 (SBC444A) or TCD-726 Disc (65 min 1kHz) without no pause 4822 397 30155 Max.
3. WARNING AND LASER SAFETY INSTRUCTIONS WARNING WAARSCHUWING All ICs and many other semi-conductors are Alle IC’s en vele andere halfgeleiders zijn susceptible to electrostatic discharges (ESD). gevoelig voor elektrostatische ontladingen Careless handling during repair can reduce (ESD). life drastically. Onzorgvuldig behandelen tijdens reparatie When repairing, make sure that you are kan de levensduur drastisch doen...
4. TAKING THE DISC OUT OF EMERGENCY Remove the top cover of the player. Remove 2 screws shown in the picture follows. Remove the disc clamper. Now you can remove the disc. Remove those screws...
5. UPDATES BACK END FIRMWARE PROCEDURE Necessary Equipment • Update data (dv4003m1.bin or dv4003m2) • USB flash drive NOTICE : The dv4003m1.bin is update data for /N1B, /N1SG and /U1B. The dv4003m2.bin is update date for /K1SG. Writing Procedure The writing of firmware takes about 1 minute 15 seconds. Put the update data to the USB flash drive.
6. SERVICE MODE Firmware (Back-end) version check Connect the DVD player to TV and operate by using Remote controller RC001DV. POWER button to turn on the unit. Press the Press the OPEN/CLOSE button to open the disc tray. Press the DISP.
Press the POWER button to turn on the unit. Press the OPEN/CLOSE button to open the disc tray. Press the DISP. ( ) Button of the Remote controller. The DVD Region code is displayed on the TV screen. REG 1: DV4003/U1B REG 2: DV4003/N1B, DV4003/N1SG REG 6: DV4003/K1SG...
IR LINK A PWB [ /U only ] 11. PARTS LOCATION PSU A PWB PSU B PWB IR LINK B PWB [ /U only ] 鉛フリー半田 半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu).
Page 26
AV A PWB 鉛フリー半田 半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu).
Page 27
AV B PWB 鉛フリー半田 半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu).
Page 28
MPEG A PWB 鉛フリー半田 半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu).
Page 29
MPEG B PWB 鉛フリー半田 半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu).
Page 30
FRONT DISPLAY A PWB FRONT DISPLAY B PWB 鉛フリー半田 半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu).
Page 31
FRONT KEY A PWB FRONT KEY B PWB 鉛フリー半田 半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu).
Page 33
00M20CW257010 LID COVER TOP MDVS4001 BL 313924125291 0240 /N1SG 975403000050M LID COVER TOP MDVS4003 SG 313924128561 0240 00M20CW257010 LID /U1B COVER TOP MDVS4001 BL 313924125291 NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.
Need help?
Do you have a question about the DV4003 and is the answer not in the manual?
Questions and answers