Andros Stem - DAHON - SERVICE INSTRUCTIONS 2010 Service Instructions Manual

Andros Stem

The newly developed Andros stem allows the handlebar to be easily
adjusted in seconds without the use of tools to fit a rider's height or
desired riding position. With the stem, the handlebar can also be placed
in a flat position when folding the bike.
Andros Stem Adjustment
Tools Needed:
• 5 mm Allen Key
Safety Lock
Lock Lever
Tightening Screws
Overview
Make sure that the
tightening screws are first
tightened with a 5 mm Allen key
to a torque of 7.5 Nm before you
start adjusting the stem. The
screws are tightened by turning
them clockwise when facing
them head-on.
Step 1 - Open the safety lock on
top of the Andros stem by sliding
it to the right when facing the stem
from behind.
NOTE: You have to push down
on the lock lever slightly when
you open the safety lock.
© 2009 DAHON, BPSA • 2009.09.DS.EN
Step 2 - Adjust the height and
position of the Andros stem to your
preferred riding position by rotating
it within its "window of adjustment".
13