iGenix IG2086 User Manual page 10

9. DEFROST - This function is used for defrosting food. Pressing the Defrost
Clock button once and the LED display will cycle to show d.1 or d.2 or d.3.
d.1 For defrosting meat, the weight range from 0.1 to 2.0 kg.
d.2 For defrosting poultry, the weight range from 0.2 to 3.0kg.
d.3 For defrosting seafood, the weight range from 0.1 to 0.9kg
CAUTION:
a. It is necessary to turn over the food during operation to obtain uniform effect.
b. Usually defrosting will need longer time than that of cooking the same food.
c. If the food can be cut with a knife, the defrosting process can be considered
completed.
d. Microwave penetrates around 4cm into most food.
e. Defrosted food should be consumed as soon as possible, it is not advised to
freeze again.
Example: To defrost 0.4kg poultry
Steps
1 After power-up, the colon flashes
Press Defrost/Clock button once to set the food
2
type.
3 Turn Time/Weight knob to set the defrost weight
4 Start cooking by pressing Instant/Start
5 During defrosting, beep sounds will be heard to
prompt you to turn over the food. Open the door
and turn over the food. Then close the door. Press
Instant/start button again to continue defrosting
10. AUTO COOKING - The oven has default cooking menu for simple operation. When
the LED display flashes " : ", press the Auto Cooking button and the LED display will
cycle to show A.1 through to A.8
Choose the appropriate menu according to the food type and weight and strictly
observe the directions in the below table, otherwise the cooking effect can vary
drastically.
10
Display
:
d.2
0.4