Plantronics CA40 DECT User Manual page 6

ADJUSTMENTS
UK
Before adjusting Listen Volume, Speak Volume, Listen Tone and Audible Cue Volume, ensure the
system is in Headset Mode.
When setting Listen Volume, Speak Volume and Listen Tone, you will hear a beep through the
headset each time you press these buttons. A double beep indicates you have reached the upper
or lower limit and a triple beep indicates that the mid-range setting has been reached.
LISTEN VOLUME – HOW OTHERS SOUND TO YOU
The Listen Volume can be adjusted by pressing the Volume Up (17) or Volume Down (18) button
on the remote pack to increase or decrease volume to a comfortable level. Alternatively you can
use the Up (3) or Down (4) button on the base unit, which provides the same function.
SPEAK VOLUME – HOW YOU SOUND TO OTHERS
Press the Mode Button (5) once to select Speak Volume Adjust. The Speak Volume Indicator (6) will
illuminate, and you will hear a triple beep in your headset. Adjust the volume level using the
Volume Up (3) or Volume Down (4) button. Once you are satisfied with the setting press the Mode
Button (5) once to select Listen Tone, twice to return to default or simply wait 10 seconds for the new
setting to be saved. The base unit Up (3) and Down (4) buttons will then revert to their default function
of listen volume adjust.
This control can only adjust the speak volume for the headset and cannot adjust the speak volume
for the telephone handset.
Tip: Normally the speak volume adjustment need only be made once when initially
setting up the CA40 Adapter, and should not require adjustment thereafter. Too high a
speak volume level can cause audio problems so be careful to set this at a comfortable
level for the person at the other end. Refer to the Troubleshooters Guide on page 12 for
more information.
LISTEN TONE
To adjust the tone (bass and treble) that you hear through the headset press the Mode Button (5)
twice. The Tone Indicator (7) will illuminate and you will hear a triple beep in your headset each
time the Mode Button (5) is pressed. Use the Up (3) or Down (4) button to adjust the base and treble
to your preferred levels. Once you are satisfied with the setting press the Mode Button (5) or simply
wait 10 seconds for the new setting to be saved. The base unit Up (3) and Down (4) buttons will
revert to their default function of listen volume adjust.
This adjustment only affects bass and treble you hear through the headset. It cannot adjust the
headset speak tone (the tone level that the caller hears), nor the handset listen or speak tone levels.
6