Plantronics CA40 DECT User Manual page 10

Hide thumbs Also See for CA40 DECT:

Table of Contents

OPERATION WITH THE HANDSET LIFTER ACCESSORY

The Plantronics Handset Lifter is an accessory that can be purchased for use with the CA40 DECT

Adapter. It has two functions:

1. To automatically notify you when an incoming call is detected even when you are away from

your desk.

2. To lift the telephone handset from its cradle at your command even when you are away from

your desk.

The installation of the Handset Lifter is described in the user guide that is supplied with it.

MAKING A CALL USING THE LIFTER

Ensure you are wearing your headset and it is correctly adjusted. Now press either the Headset

Button (2) on the base unit or the Talk Button (19) on the remote pack. The lifter will then raise the

handset off the hook, the Headset Indicator (1) will illuminate and the Talk Indicator (20) will blink.

You will then hear a dial tone and can proceed to make the call as normal.

When you have finished your call press either the Headset Button (2) or Talk Button (19) once. The

handset lifter then lowers the handset to terminate the call and the Headset Indicator (1) and Talk

Indicator (20) both extinguish.

RECEIVING A CALL USING THE LIFTER

Ensure you are wearing your headset and it is correctly adjusted. When a new call is received the

telephone rings as normal, but in addition, a ring alert comprising a repeating sequence of three

short beeps will be heard in your headset, and the remote pack buzzer will ring.

Note: These additional call alerts are only active when the Lifter is connected.

Press either the Headset Button (2) on the base unit or the Talk Button (19) on the remote pack.

The lifter will then raise the handset off the hook, the Headset Indicator (1) will illuminate and the

Talk Indicator (20) will blink. You will then be able to talk to the caller.

When you have finished your call press either the Headset Button (2) or Talk Button (19) once. The

handset lifter then lowers the handset to terminate the call and the Headset Indicator (1) and Talk

Indicator (20) both extinguish.

SWITCHING FROM HEADSET TO HANDSET WHEN USING THE LIFTER

If during a call you are using the headset and want to switch to the telephone handset, remove

the handset from the lifter, then press the Headset Button (2) or Talk Button (19) once (Headset

Indicator (1) and Talk Indicator (20) will both extinguish). The Lifter will lower and you will then be

able to continue the call using the handset.

Table of Contents