Installation - Plantronics CA40 DECT User Manual

UK

INSTALLATION

Please install the CA40 DECT Adapter in accordance with the instructions detailed in the
Quick Start Guide.
HEADSET/HANDSET SELECTION
Pressing the Headset Button (2) on the base unit selects Headset or Handset mode. The Headset
Indicator (1) will be illuminated when in Headset mode and off when in Handset mode.
The same function is provided by the Talk Button (19) on the remote pack.
PLACING A CALL USING THE HEADSET
To place a call using the headset, the system must be in Headset mode. Take the handset off the
hook and dial in the normal way. You will then be able to talk through your headset. When the
call is complete, return the telephone handset to the cradle.
Tip: By selecting Handset mode after completing your call, you will conserve the remote
pack battery power and extend the remaining available talktime. You can achieve this by
pressing either the Headset Button (2) or the Talk Button (19) immediately on conclusion
of the call.
Note: If you have installed a Plantronics Handset Lifter please refer to the section
"Making a call using the Lifter" on page 10.
RECEIVING A CALL USING YOUR HEADSET
When your telephone rings take the handset off the hook. Ensure that your CA40 Adapter is
already in Headset mode. You will then be able to talk through your headset. When the call is
complete, return the telephone handset back to the cradle.
Note: If you have installed a Plantronics Handset Lifter please refer to the section
"Receiving a call using the lifter" on page 10.
PLACING AND RECEIVING A CALL USING THE HANDSET
In Handset mode the telephone can be used to make and receive calls in the normal way.
5