NAD T775 HD Owner's Manual page 18

OPERATION
USING THE T 775 – SETUP MENU
ANALOG AUDIO
The T 775 has nine analog audio inputs including 7.1 input. These analog
inputs - Audio 1, Audio 2, Audio 3, Audio 4, Audio 5, Audio 6, Audio Front,
Audio MP and 7.1 Input can be variably assigned to each Source.
Scroll to 'Analog Audio' and then press
an analog audio input to the particular Source. There are three choices
– Audio, 7.1 Input or Off.
When 'Audio' is chosen, press and then
desired audio input – 1 to 6, Front and MP.
Select '7.1 Input' to choose the audio signal fed to '7.1 Channel Input. ' If 'Off'
is selected, no incoming analog audio signal is selected by the particular
Source.
NOTE
An incoming digital signal present at the assigned digital input will
always take precedence over the assigned analog audio input, even if
both are present. To maintain the analog audio input for the particular
Source, select 'Off' at the 'Digital Audio' setting of the same 'Source'
menu.
GAIN
Gain adjustment allows all sources to play back at the same volume so you
don't need to adjust the volume every time a new source is selected. It is
generally preferable to reduce the level of the loudest source rather than
making louder the softer sources.
Scroll to 'Gain' , press and then
-12dB to 12dB.
18
and then to select and assign
keys to select and assign the
to step through the desired level from
DIGITAL AUDIO
To take advantage of the T 775's high performance surround and digital
audio circuitry, it is advisable that its Digital Audio inputs are selected.
There are three types of Digital Audio input for the T 775. These areHDMI,
Optical and Coaxial digital inputs. A fourth option is 'Off' whereby no
incoming digital audio signal is selected by the particular Source.
The desired digital audio input for a particular Source can be selected
by scrolling to 'Digital Audio' , press and then
desired digital input source. After finalizing the desired type of Digital Audio
input, press and then again to select the specific Digital Audio input.
There are eleven Digital Audio inputs selectable for the T 775. They are the
following
HDMI ➜ HDMI 1, HDMI 2, HDMI 3, HDMI 4
Optical ➜ Optical 1, Optical 2, Optical 3, Optical Front
Coaxial ➜ Coaxial 1, Coaxial 2, Coaxial 3
NOTE
An incoming digital signal present at the assigned digital input will
always take precedence over the assigned analog audio input, even if
both are present. To maintain the analog audio input for the particular
Source, select 'Off' at the 'Digital Audio' setting of the same 'Source'
menu.
VIDEO
There are four types of video input a particular Source could be assigned.
These are HDMI, Component, S-Video and Video inputs. A fifth option is 'Off'
wherein the particular Source is prompted not to select any Video input.
Navigate through the Video input selections by pressing
to step through the selections. The following are the assignable Video
inputs
HDMI ➜ HDMI 1, HDMI 2, HDMI 3, HDMI 4
Component Video ➜ Component 1, Component 2, Component 3
S-Video ➜ S-Video 1, S-Video 2, S-Video 3, S-Video 4, S-Video 5, S-Video
Front
Video ➜ Video 1, Video 2, Video 3, Video 4, Video 5, Video Front
to step through the
and then