A/V Presets - NAD T775 HD Owner's Manual

A/V PRESETS

The T 775's simple but powerfully flexible system of 'Presets' allows you to
customize virtually every aspect of your audio-video playback, and recall
them with a single key-press. The parameters 'Listening Mode, ' 'DSP Options'
and 'Tone Controls' accessible via the 'Main Menu' together with 'Speaker
Setup and 'Display Setup' configurable through 'Setup Menu' are stored
together as a Single Preset.
You might create one Preset optimized for pop music and another for classical.
One more Preset can be set up to recall each family member' s favorite setting
or one for fully cinematic home-theater playback and yet another one for late-
night movies, with each Preset fine-tuned to a particular scenario or preference.
CREATING PRESETS
Creating a Preset consists simply of storing a complete set of the
parameters set forth in the 'Listening Mode, ' 'DSP Options' and 'Tone
Controls' accessible via the 'Main Menu' together with 'Speaker Setup and
'Display Setup' configurable through 'Setup Menu. '
Scroll to 'A/V Presets' using the keys to save a collection of said
parameter settings to a Preset. Select a Preset number and by a
combination of pressing the keys, you can selectively include in
the particular Preset any of the above-mentioned parameter settings by
choosing 'Yes' . If you decide not to include in the particular Preset a certain
parameter setting, select 'No' .
Now in order to save the settings chosen for the particular Preset number,
scroll down to 'Save Current Setup to Preset' and press the
chose to load instead the default settings, scroll down to 'Load Defaults to
Preset' and press the key to restore the default settings.
In addition to the parameter settings, the Preset label itself can be assigned
a new name. This new Name will be shown in the VFD as well as on the
OSD.
To rename the Preset label, scroll to 'Name' and press
Then, press to pick and select through the alphanumeric selections.
Press to move to the next character or back to the previous character
and at the same time save the changes done on the current character.
NOTE
The selected Preset remains in force until you select a different Preset.
RECALLING PRESETS
You may recall a Preset at any time using the HTR 3 remote control. Press
the HTR 3's square AVPS key and then the numeric key 1-5 corresponding
to the desired preset number. The newly recalled Preset will then manifest
or replace the previous Preset (if any).
key. If you
to go the character.
OPERATION
USING THE T 775 – SETUP MENU
29