Rear Panel - NAD T775 HD Owner's Manual

IDENTIFICATION OF CONTROLS

REAR PANEL

1 2 3 4 5
ATTENTION!
Please make sure that the T 775 is powered off or unplugged before making any connections. It is also advisable to power-down or unplug all associated
components while making or breaking any signal or AC power connections.
1 DIGITAL AUDIO IN (OPTICAL 1-3, COAXIAL 1-3) : Connect to the
optical or coaxial S/PDIF-format digital output of sources such as CD or
DVD players, HDTV or satellite tuners and other components. Coaxial
and Optical digital input association is configurable via the Setup Menu.
DIGITAL AUDIO OUT (OPTICAL, COAXIAL) : Connect the optical or
coaxial digital OUT ports to the corresponding S/PDIF digital input of
a recording component such as a CD recorder, DAT deck, computer
soundcard or other digital processors.
2 HDMI (HDMI 1-4, HDMI MONITOR OUT) : Connect HDMI inputs to
the HDMI OUT connectors of source components such as DVD player or
HDTV satellite/cable box. Connect the HDMI Monitor OUT to a HDTV or
projector with HDMI input.
WARNING
Before connecting and disconnecting any HDMI cables, both the T 775
and the ancillary source must be powered OFF and unplugged from the
AC outlet. Failure to observe this practice may cause permanent damage
to all equipment connected via HDMI sockets.
10
6 7 8 9
16
15
10 11
17 18
3 COMPONENT VIDEO 1-3 IN, COMPONENT VIDEO OUT : Connect
the Component Video IN 1-3 inputs to Component Video outputs
from compatible source components, typically a DVD player and
terrestrial or satellite HDTV tuner. Connect Component Video OUT to
the Component Video input of a compatible video monitor/TV. Be
sure to observe consistency in connecting the Y/Pb/Pr jacks to the
corresponding sources/inputs. The routing of the component video
inputs is fully configurable via the Setup Menu. The T 775's component
video inputs and outputs are fully wideband and compatible with
allowable HDTV formats.
4 MP DOCK: The T 775 is equipped with a data port in the rear panel
where an optional NAD IPD (NAD IPD Dock for iPod), NAD IPD 2 and
later variants can be plugged in. Connect the "MP DOCK (DATA PORT)"
jack of the T 775 to the corresponding "DATA PORT" socket of the
optional NAD IPD model. Refer also to the item about "LISTENING TO
YOUR iPod PLAYER" under the "USING THE T 775 - AM/FM/DB/iPod"
segment of the "OPERATION" section.
NOTE
The external "NAD IPD Dock for iPod" (NAD IPD) model is not supplied
with your T 775.
12 13 14
19 20