Loading Code-Libraries; Search Mode - NAD T775 HD Owner's Manual

LOADING CODE-LIBRARIES

The HTR 3 can store a different library of default NAD codes for each of its Device Selector "pages. "
If the original default library does not control your NAD CD player, tape deck, DVD player, or other
component, follow the procedure below to change the code-library.
Begin by ensuring that the component you wish the HTR 3 to control is plugged in and powered-up
("on, " not merely in standby). To enter the HTR 3s Library Mode, simultaneously press-and-hold for 3
seconds both the desired Device Selector key and the [AVPS] key, until the Learn LED turns green.
While keeping the HTR 3 pointed toward the component, enter the first appropriate three-digit code-
library number from the table below. Press [OFF]. If the component turns off, press [ENTER] to accept
that code-library number and exit the Library Mode. If the component does not turn off, enter the next
three-digit code-library number from the table.
When you enter the correct number the component will turn off; press [ENTER] to accept that code
library number and exit the Library Mode.
LIBRARY CODE NAD PRODUCT DESCRIPTION
100 Receiver/Processor (Discrete ON/OFF)
101 Receiver/Processor (Toggle ON/OFF)
102 S170
103 L75
104 Second Zone Commands (Zone 2)
3112 Zone 3
4112 Zone 4
105 L70
106 L76
107 118
108 L53
109 L73
110 Stereo Receiver / Amplifier
111 Stereo Second Zone
112 Txx5 Series
200 CD Player
201 CD Player (old)
202 5170, 5240, 5340
203 5325
204 5060
205 M5

SEARCH MODE

If none of the codes from the table, when entered, turns on the component, and if you are quite sure
you have followed the above procedure completely and carefully, you may want to try the "search"
method as follows:
Enter Library Mode by simultaneously pressing-and-holding for 3 seconds both the desired Device
Selector key and the [AVPS] key, until the Learn LED turns green. Now press-and-hold the HTR 3's [ ] or
[ ]) key; the remote will step through all the available codes at a rate of approximately 1 per second.
When the component turns off, immediately release the cursor key; press [ENTER] to accept that code-
library and exit the Library Mode. Try a few commands; should you prove to have stepped past the
needed code-library, re-enter the Library Mode and use the cursor key to step back to it.
NOTE
It is possible that search mode will find code-libraries that operate, at least partially, some other
brand (non-NAD) components. You may certainly exploit such capabilities as you find them.
However, since we can only ensure the completeness or accuracy of NAD code-libraries, we cannot
support the HTR 3's operation with other-brand components.
LIBRARY CODE NAD PRODUCT DESCRIPTION
300 Tuner
301 L75, L76 Tuner
302 L70 Tuner
303 L53 Tuner
304 L73 Tuner
305 C425
306 C445
307 Txx5 Series Tuner
400 Tape Deck B
401 TAPE Deck A
500 TV 280
501 MR13
502 MR20
503 PMR45
600 T535, T562, T585, M55
601 T550, L55
602 T512, T531, T532, T571, T572
603 L70, L73 DVD
604 L56
605 T513, T514, T515, T517, T524, T533, T534
606 L53 DVD
OPERATION
USING THE HTR 3 REMOTE CONTROL
41