Introduction; Getting Started; What's In The Box; Choosing A Location - NAD T747 Owner's Manual

Av surround sound receiver
Hide thumbs Also See for T747:
Table of Contents

Advertisement

WHAT'S IN THE BOX

Packed with your T 747 you will find
An AM loop antenna
A FM lead-type antenna
A detachable AC power cord
The AVR 3 remote control with two AA batteries.
The ZR 5 zone remote control with 3V CR2025 battery.
This owner's manual.
SAVE THE PACKAGING
Please save the box and all of the packaging in which your T 747 arrived.
Should you move or otherwise need to transport your T 747, this is by far
the safest container in which to do so. We've seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!

CHOOSING A LOCATION

Choose a location that is well ventilated (with at least several inches to both
sides and behind), and that will provide a clear line of sight, within 23 feet/7
meters, between the T 747's front panel and your primary listening/viewing
position—this will ensure reliable infrared remote control communications.
The T 747 generates a modest amount of heat, but nothing that should
trouble adjacent components.
It is especially important that sufficient ventilation be provided. If you are
contemplating on locating the T 747 within a cabinet or other furniture, consult
your NAD audio/video specialist for advice on providing adequate airflow.

DEFAULT SOURCE SETTINGS

The following table lists the default SOURCE settings. Note that the Audio
Input settings show both digital and analog audio input. Digital input will
always take precedence over analog audio input even if both are present.
Source
Audio Input
Source 1
HDMI 1 IN/ Audio 1 IN
Source 2
Optical 1 IN/ Audio 2 IN
Source 3
Optical 2 IN/ Audio 3 IN
iPod
Audio 4 IN
Source 5
Coaxial 1 IN/Audio 5 IN
Multi
7.1 Input
Optical Front Input/ Audio Front
Front
Input
MP
Audio MP input
Tuner
For Video output, select the highest quality video format available on your
TV/Monitor and utilize this for your Monitor OUT connection from the T 747 to
the TV/Monitor. In most cases, this would be HDMI but for other TV/Monitor
without HDMI input, the best quality connection could be Component Video ,
S-Video or Composite video input.
To modify the above default settings and for a better understanding of source
setting and combinations, please refer to the item about "SOURCE SETUP" in the
"USING THE T 747 - SETUP MENU" segment of the "OPERATION" section.

INTRODUCTION

GETTING STARTED

Video Input
HDMI 1 IN
Component Video 2 IN
S Video 3 IN
S-Video 4 IN
Video 4 IN
Component Video 3 IN
S-Video Front IN
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents