Download Print this page

Advertisement

Quick Links

INFORMATION
To familiarise yourself with your installed Waterguard system please read this user guide in full. If
you have any further questions, please contact the office on 01226 244200.
The Waterguard Puddle is the latest development in multi zone water leak detection technology. It's language free
control unit which has 5 water leak detection channels, requires no setup and minimal maintenance making it the
easiest system on the market to install and operate.
Your system will be monitoring up to 5 water leak detection
channels using various water sensing devices dependent on
application. These include, water sensing cable or tape, water
sensing feet and/or float switches. When any of these devices
detect water, the Puddle will alarm, and where installed a
solenoid valve will automatically close shutting off the water
supply and minimising any potential damage. The Puddle is
available as an alarm only system or with an automatic shut off
valve. Applications with automatic shut off will have two sperate
controls whereas alarm only will have the one control panel as
below only.
Details of each device should be recorded and supplied to you
by the system installer. However, please do not hesitate to
contact the office for any information we may hold.
Dedicated technical helpline: 01226 397987
© 2024 Waterguard Services Limited, All Rights Reserved
Waterguard Puddle User Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the PUDDLE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for WATERGUARD PUDDLE

  • Page 1 01226 244200. The Waterguard Puddle is the latest development in multi zone water leak detection technology. It’s language free control unit which has 5 water leak detection channels, requires no setup and minimal maintenance making it the easiest system on the market to install and operate.
  • Page 2 Any connected valves will remain in whichever state it was when power was lost. Once power is restored, power to the Puddle is indicated by a single white flash and beep. The unit will then flash yellow as it enters tracking mode for approximately 10 seconds followed by a green flash, the Puddle will then be ready for action again.
  • Page 3 No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties included within Waterguard Services Limited Standard Terms and Conditions of Sale is given with respect to the content of these marketing materials. In no case will Waterguard Puddle User Guide Waterguard Services Limited be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product.