Nad Ipd 2 - NAD M15 HD Owner's Manual

Av surround sound preamplifier
Hide thumbs Also See for M15 HD:
Table of Contents

Advertisement

OPERATION
LISTENING TO YOUR iPod PLAYER

NAD IPD 2

The NAD IPD 2 has its own remote control - the DR 1. For you to control
the NAD IPD 2 using the DR 1, you have to go to "iPod Setup" menu (please
refer to the item about "iPod Setup" under the "USING THE M15 HD – SETUP
MENU" segment of OPERATION section) and then set "Auto Connect" to "No".
With this setting, you can then use the DR 1 to control your iPod player
docked in the NAD IPD 2. Note that if you set "Auto Connect" to "No" while
at Source 4, you have to change source and then return to Source 4 for the
changed setting to take effect.
When using the DR 1 to command your iPod player docked in the NAD
IPD 2, you have to refer to your iPod player's own display screen to make
full use of its feature; there is no OSD at this condition. However, any time
you press HTRM's [
] or front panel's [TUNE
comes up. If you select "iPod Menu" at this "Menu Select" option, the NAD
IPD 2 gets manually connected. The control of the NAD IPD 2 will then
again be done through the M15 HD using the applicable front panel
control buttons or HTRM buttons while referring to the OSD; the NAD IPD 2
will not respond to any DR 1 commands at this stage.
In addition to the above commands common to the DR 1, below are the
descriptions of the other DR 1 control buttons.
LIGHT
Press [LIGHT] to turn ON the backlight of your iPod player if it is at idle
mode.
MENU
Press [MENU] to return to previous option or menu selection
ENTER
Press [ENTER] to select an option or start playback.
� (REPEAT)
Toggle to initiate repeat mode as follows - repeat one song, repeat all songs
or cancel repeat mode
� (RANDOM)
Toggle to initiate playback in random order. There are three random modes
– Shuffle Song, Shuffle Album or Shuffle Off.

TO VIEW VIDEOS OR PHOTOS LOADED IN YOUR iPod
Videos or photos uploaded in your iPod can be viewed directly via the
M15 HD. The following are the steps
1 Make sure that the [TV Out] setting of your iPod's Video Settings menu
is at [On] mode and appropriate [TV Signal] is chosen.
2 Video or photo file selections and playback procedures are managed
directly from your iPod player and not through the M15 HD. You must
exit completely from the M15 HD's Setup Menu or Menu Select OSD for
you to be able to navigate through your iPod player's video or photo
menu options. A more direct way is by going to the 'iPod Setup' menu
and set 'Enabled' to [No].
3 With the NAD IPD's S-VIDEO OUT and AUDIO OUT ports connected to
the M15 HD's AUDIO 4 / S-VIDEO 4 input or to any other assignable
], the "Menu Select" OSD
input, you can now directly enjoy via M15 HD your video or photo
file selections as uploaded in your iPod. Make sure that you select the
correct 'Source Number' of the M15 HD.
NOTE
For other navigation functions, please refer to your iPod player's owner's
manual. Depending on the iPod player model, some other functions
maybe controlled using the applicable M15 HD navigation controls.
iPod is a trademark of Apple, Inc., registered in the U.S. and other countries.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents