Advertisement
> R E A R L I N E D R A W I N G
> S P E C I F I C A T I O N S
Line Level Input
Input impedance (R and C)
Input sensitivity
Maximum input signal
Signal/Noise ratio, A-weighted
volume set to unity gain)
Channel Separation
Frequency response
Frequency response (subwoofer out)
Output
Maximum output level
THD (CCIF IMD, DIM 100)
56kΩ + 220pF
40mV (ref. 500mV out)
>8Vrms
>90dB (ref. 500mV in 500mV out,
>80dB (ref. 2Vout, Volume maximum)
>70dB (ref. 1kHz / 10kHz)
±0.3dB (ref. 20Hz - 20kHz, Tone Active)
±0.3dB (ref. 20Hz - 20kHz, Tone Defeat)
10 - 200Hz (ref. -3dB)
>10Vrms into 600Ω
<0.005% (ref. 20Hz - 20kHz, 2V out)
NAD Electronics International reserves the right to change specifi cations or features
without notice. NAD is a registered trademark of NAD Electronics International.
All rights reserved. No part of this publication may be reproduced, stored, or transmitted
in any form whatsoever without the written permission of NAD Electronics International.
© 06/10 NAD Electronics International.
www.NADelectronics.com
Tone Controls
Treble
Bass
Centre
Power Consumption
Normal operation
Standby mode
Dimension and Weight
Unit dimensions (W x H x D)
Gross*
Net weight
Shipping weight
* Gross dimensions include feet, volume control and extended rear panel terminals.
±12dB at 10kHz (ref. 2V in 2V out)
±12dB at 100Hz (ref. 2V in 2V out)
±6dB at 3Hz (ref. 2V in 2V out)
80W
<1W
435 x 145 x 385mm
13.1kg
22kg
Advertisement
