Using The Zr 5 Remote Control - NAD C 725BEE Owner's Manual

Hide thumbs Also See for C 725BEE:
Table of Contents

Advertisement

1
2
5

USING THE ZR 5 REMOTE CONTROL

The ZR 5 remote control is a discrete compact remote for controlling the C 725BEE from various
rooms other than the main room. The ZR 5 remote allows full separate control of the source selection
irrespective of the main room. This means the zone input may be completely different audio from the
main input.
1 on/off: Switch ON/OFF the Zone feature. When OFF, the active RECORD OUT/ZONE 2 Selector
LED will be extinguished.
2 Source [
] : Select the active input of the NAD C 725BEE that will be sent out to the rear
3
panel REC OUT/ZONE 2 output port.
4
3 mute: Temporarily switch OFF or restore the Zone Volume level.
4 volume [
] : This function is not applicable for the C 725BEE.
5 preSet [
] : Step up or down between stored radio presets. This control button is possible if
the selected Zone is "TUNER" and the active tuner section has stored presets.
6 The following CD Player Zone buttons can control a CD Player linked to the C 725BEE under the
6
following conditions
a The selected zone is "CD".
b An active CD Player with disc loaded is connected to the CD input of the C 725BEE.
Skip [
] : Go to the beginning of a track/file or previous track/file.
Skip [
] : Go to the next track/file.
[ ] : Start playback.
IDENTIFICATION OF CONTROLS
remote control
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents