Advertisement
Quick Links
F152S 3D Printer
Quick Start Guide
INTRODUCTION
Thank you for purchasing this F152S 3D Printer! This printer uses the FFF (Fused Filament
Fabrication) method of printing. It features a metal frame, fully enclosed structure, four door opening
design, and heated build platform. It can print 1.75mm ABS, PLA, metal fill, wood fill, and other
filament types with melting points below 250° C. It has a 200 x 185 x 195 mm print area and can
print at speeds up to 150mm/sec. It can print from a computer using a USB connection or from sliced
g-code files stored on a micro SD™ card or from our App. It supports auto leveling, automatic shut-
down, with a 4.3 inch touch screen, a removable and a heated glass build plate.
CUSTOMER SERVICE
The WEEDO Customer Service department is dedicated to ensuring that your ordering, purchasing,
and delivery experience is second to none. If you have any problem with your order, please give us
an opportunity to make it right. You can contact a WEEDO Customer Service representative through
the Chat link on our website www.weedo.ltd or via email at: salesservice@wiibooxtech.com.
Check the website for support times and links.
Advertisement
Related Manuals for WEEDO F152S
Summary of Contents for WEEDO F152S
- Page 1 Quick Start Guide INTRODUCTION Thank you for purchasing this F152S 3D Printer! This printer uses the FFF (Fused Filament Fabrication) method of printing. It features a metal frame, fully enclosed structure, four door opening design, and heated build platform. It can print 1.75mm ABS, PLA, metal fill, wood fill, and other filament types with melting points below 250°...
- Page 2 PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact WEEDO Customer Service for a replacement. 1x 3D printer 1x Set of Allen keys...
- Page 3 GETTING STARTED 1. Open the box and remove the printer from the protective foam. Set it on a flat, stable surface, then remove the plastic film. 2. Remove the part A and Part B foam from left and right doors. Take out the filament and accessory box.
- Page 4 6. Remove the micro SD™ card from the accessory box and insert it in the card slot to the right side of the printer. Next, remove the included AC power cord, plug one end into the AC power socket on the back side of the printer, then plug the other end into a nearby AC power outlet. Last, press the button on the front side of the printer, and the printer turn on, the screen gets in the guide manual at the first time.
- Page 5 8. Press the extruder handle, then insert filament into the hold to a depth of about 4cm. At last, insert the tube into the connector. 9. Read the quick guide in the screen step by step, in the step 4, choose the Filament PLA and wait for the filament to finish loading.
- Page 6 11. Check the test model When the printing is finished, use the scraper in the accessory box to remove the model out with the model edge. Firstly, check the sides of the cube. The nozzle is at normal status if the surface is smooth and there are no splitting layers.
Need help?
Do you have a question about the F152S and is the answer not in the manual?
Questions and answers