Removing The Front Cover - APRILIA SR 50 - 2001 Manual

2
1
REMOVING
THE COVER SUPPORT ELEMENT
Carefully read p. 55 (MAINTENANCE).
♦ Place the vehicle on the center stand.
♦ Rotate the handlebar completely, unscrew
and remove the screws (1).
♦ Remove the cover support element (2).
NOTE
Upon reassembly, fit the tangs
correctly in the appropriate seats.
3
4
5

REMOVING THE FRONT COVER

Carefully read p. 55 (MAINTENANCE).
♦
Remove the cover support element (2), see
beside (REMOVING THE COVER
SUPPORT ELEMENT).
♦
Rotate the handlebar completely, unscrew
and remove the screws (3), taking the
washers.
CAUTION
Proceed with care.
Do not damage the tangs and/or their
seats.
Handle the plastic and
components with care and avoid scraping
or damaging them.
3
6
♦
Remove the front cover (4), by pulling it
upwards.
NOTE
Upon reassembly, correctly insert
the lower tang (5) and successively the two
side tangs (6) in their seats.
painted
use and maintenance SR 50
69