Advertisement
Carefully read p. 61 (MAINTENANCE).
N
Place the vehicle on the center or side
stand, see p. 59 (POSITIONING THE
VEHICLE ON THE STAND).
N
Insert the key (1) in the lock (2).
N
Turn the key (1) clockwise.
N
Raise and remove the saddle (3).
Upon reassembly:
NOTE
Before lowering and locking the
saddle, make sure that you have not left
the key in the glove/tool kit compartment.
N
Insert the tang (4) of the saddle in the ap-
propriate seats (see figure).
N
Lower the saddle and press the its rear
part.
CAUTION
Do not leave your vehicle unattended
without ensuring that the saddle (3) is
properly positioned and locked. Should
you forget and ride away with the sad-
dle loose, you could be injured.
Carefully read p. 61 (MAINTENANCE).
WARNING
Before carrying out the following opera-
tions, let the engine and the exhaust si-
lencer cool down until they reach room
temperature, in order to avoid burns.
N
Remove the saddle, see beside (RE-
MOVING THE SADDLE).
N
Place the vehicle on the center stand,
see p. 59 (POSITIONING THE VEHICLE
ON THE STAND).
N
Unscrew and remove the four screws
(5).
CAUTION
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
N
Remove the side panel (6).
use and maintenance Pegaso 650
-
81
Advertisement
