Advertisement
Carefully read p. 93 (BULBS).
WARNING
Do not ride your vehicle if the tail light
and the stoplight are not working prop-
erly. The stoplight is particularly impor-
tant to prevent other vehicles from
rearending you. Obviously, failure to
comply with these instructions could
lead to a serious accident with subse-
quent injuries or even death.
NOTE
Before changing a bulb, check
the fuses, see p. 90 (CHANGING FUSES),
also check the operation of the stoplight
switches, see p. 71 (CHECKING THE
SWITCHES).
The rear light contains:
– two parking light / stoplight bulbs (1).
96
use and maintenance Pegaso 650
To change the bulb:
N
Place the vehicle on the center stand.
N
Unscrew and remove the two screws (2).
N
Remove the lens (3).
NOTE
Upon reassembly, make sure
that the lens seats properly.
Upon reassembly, do not overtighten
the two screws (2). Overtightening will
crack the lens.
N
To remove the bulb (1), push the bulb
slightly forward and rotate it counter-
clockwise.
N
Pull it from its seat.
N
Correctly install a new bulb of the same
type.
NOTE
Ensure that the orientation of
your replacement bulb is identical to that of
the original bulb. Do not try to force the
bulb, it will fit easily if it is properly oriented.
-
CAUTION
Carefully read p. 93 (BULBS).
NOTE
Before changing a bulb, check
the fuses, see p. 90 (CHANGING FUSES)
To change the bulb:
N
Unscrew and remove the screw (4).
CAUTION
Upon reassembly, do not overtighten
the screw (4). Overtightening will crack
the light unit.
N
Remove the light unit (5) from its seat.
CAUTION
While removing a bulb socket, do not
pull on the wires.
N
Grasp the bulb socket (6), pull it and re-
move it from its seat.
N
Remove the bulb (7) and replace it with
an identical bulb.
Advertisement
