Changing The Headlight Bulbs - APRILIA MX 50 Use & Maintenance Book

Fig. 63
9
8
Fig. 64

CHANGING THE HEADLIGHT BULBS

(Fig. 63)
To change the low and high beam bulbs, proceed
as follows:
The headlight contains:
◆
◆
To change the bulbs, proceed as follows:
◆
2
◆
To extract the bulb electric connector, do
not pull its electric wires.
A parking light bulb (1).
A low beam/high beam bulb (halogenous) (2).
The front part of the fairing (4), complete
with the headlight, remains connected to
the electric wires; do not pull them.
Remove the two ties (3), used to secure front fai-
ring to frame, from forks.
Handle the plastic components with care
and avoid scraping or damaging them.
Withdraw the front part of the fairing (4), complete
with the headlight, downwards and disconnect it
from the pin (5) provided on the dashboard.
63