Page 2
All information in this manual is based upon the latest product information available at the time of publication. At Kohler, we constantly strive to improve the quality of our products. We reserve the right to make changes in product characteristics, packaging or availability at any time without notice.
Page 3
Catalogue Thank you for choosing Kohler Company....................2 Cautions and warning..........................4 Specification............................... 6 Overall diagram............................7 Guide on usage of remote controller......................8 Remote controller setting guide........................9 Preparations before initial use........................11 Cover/seat OPEN/CLOSE function......................12 Flushing your toilet............................. 13 Auxiliary button board function........................
Page 4
Do not use any hard setting material (cement mortar) while installing the toilet. Thermal expansion of □ hard setting material (cement mortar) will damage or crash the feet of toilet. Kohler will not be responsible for any damage because of using hard setting material (cement mortar) for toilet installation.
Page 5
Prevent any exposed skin contact with heated seat too long to prevent low temperature burning. This device complies with the method described in the manual. Do not use attachments not recommended by Kohler Co. such as angle valve etc. Do not lean on cover when use this device to prevent product from damage.
Page 6
* The description of water efficiency label marked on intelligent toilet: water efficiency label represents a compliance mark of the water efficiency grade etc. performance of intelligent toilet. * Power value testing condition: dynamic pressure 0.2MPa, inlet water temp 15 ℃. The above parameters are for the full-functional version. For differences in the specifications of models, refer to their product configuration matrix. 1381995-T01-G Kohler Co.
Page 7
* Antibacterial: the seat contains long term inorganic anti-bacteria material which will inhibit bacteria growth on surface, this does not represent the mildew and other incidental effects. The antibacterial rate is more than 90%. (Perform test in accordance with GB21551.2-2010 requirements. Testing lab: China household electrical appliances testing institute; electromechanical products testing technology center of Shanghai Entry-Exit inspection and quarantine bureau.) Kohler Co. 1381995-T01-G...
Page 8
When being seated, the function will be disabled). K - Cover When unseated, press this button to perform Cover OPEN/CLOSE action. L - Seat When unseated, press this button to perform Seat OPEN/CLOSE action. 1381995-T01-G Kohler Co.
Page 9
1. When Seat Temp indicating LED lights up, indicates energy saving function starts. Toilet generates one short beep. 2. When seat temp indicating LED lights OFF, indicates energy saving function stops. Toilet generates one long beep. Kohler Co. 1381995-T01-G...
Page 10
Do not apply frequent and violent external force on remote buttons. Place remote back to docking station on the wall after usage. Prevent remote from dropping in the process of use. : secure remote with base by screws, specific method refers to installation guide. 1381995-T01-G Kohler Co.
Page 11
Water flow intensity: mid Standby mode: OFF Ejection position: mid Prolonged seating indication function: OFF Pulsation mode: OFF The above settings are for the full-functional version. For differences in the specifications of models, refer to their product configuration matrix. Kohler Co. 1381995-T01-G...
Page 12
B. Seat OPEN/CLOSE Seat OPEN and CLOSE by remote When unseated, press seat OPEN/CLOSE button on remote, perform corresponding OPEN/CLOSE function (details are shown in the diagram of remote control). When being seated, press remote button will be invalid. 1381995-T01-G Kohler Co.
Page 13
Flushing your toilet A. Auto flush function a) Seat usage When cover is OPEN and toilet is in use. Toilet will auto flush after unseated for a certain time. Close seat within a period of time. Kohler Co. 1381995-T01-G...
Page 14
Customer could press flush button on side panel to flush the toilet. D. Manual press to flush the toilet Customer could open beauty cover on side panel to press the pneumatic switch as shown to flush the toilet when power is off. Pneumatic switch 1381995-T01-G Kohler Co.
Page 15
All functions following factory default setting. When use Front Wash /Rear Wash, start corresponding functions and auto stop after 5min. When use dryer function starts, starts this function and auto stop after 4min. Use STOP button to stop Front Wash/Rear Wash/Dryer Function. Kohler Co. 1381995-T01-G...
Page 16
When energy saving set to ON status, product shall auto detect the idle hours and decrease the heating temperature to reach of energy saving purpose. For details of automatic energy saving, refer to pages 9. Deodorizer When unseated, auto starts deodorizer function. 1381995-T01-G Kohler Co.
Page 17
Caution: The success of the cleaning process depends on the water hardness and temperature, the dose precision of composition, cleaning regulation variation and cleaning product status etc. factors. Kohler can’t ensure the validity of rules since these factors may change.
Page 18
Use a wet soft brush to clean the nozzle. Press “position” key again or the “stop” key, the nozzle will retract or the nozzle will retract automatically after 5 min. Nozzles can be removed manually for cleaning. 1381995-T01-G Kohler Co.
Page 19
Inspect joint for any water leak, then plug power cord Install side board. The steps to replace filter are the same as the above steps. Notes: If filter is found broken or serious blocked, please replace it in time. Kohler Co. 1381995-T01-G...
Page 20
Note: after remove deodorizer block, do not insert hand or other objects into deodorizer block cavity to prevent fan or other parts damage. Scan the QR code to order the replaced part with the part number 22761T-NA. Deodorizer filter clean Clean dirt on deodorizer filter mesh periodically as shown. 1381995-T01-G Kohler Co.
Page 21
6. In case of long term idle status, remove the batteries in the charging block of remote control. b) Open cover or add water inside the toilet might avoid the plastic parts yellowing problem caused by backflow air from discharge pipe after residual toilet water evaporated during long-term idle status. Kohler Co. 1381995-T01-G...
Page 22
Trouble shooting This guide of trouble shooting is for general help only. Authorized representatives or qualified electricians of Kohler Company shall be able to solve all electrical failures. If you want to know about the service of warranty, please contact local dealers or wholesalers.
Page 23
15. The seat is not A. Remote seat temp set too low. A. Set seat temp to proper dial. warm. B. Press “ ” button at the side panel. B. Toilet is on standby mode. Kohler Co. 1381995-T01-G...
Page 24
GB/T 26572. :Indicate only partial product series contains this substance. Note: the information provided is based on the supplier data and Kohler inspection results. The product is designed not to hurt the environment. Under current technology, all hazardous materials have been used in the smallest amounts possible.
Need help?
Do you have a question about the Innate K-8340X-2EXWT-0 and is the answer not in the manual?
Questions and answers