Kohler Innate K-8340X-2EXWT-0 Homeowner's Manual page 19

C.
Cleaning or Replacing the Filter
Clean or replace the filer if there's not enough water volume or water is not coming out.
Cleaning the toilet filter
Turn power off.
Unplug for trade version
Turn off inlet water supply.
Turn off stop valve
Take out filter and clean it.
Reinstall filter and turn stop valve on.
Inspect joint for any water leak, then plug power cord
Install side board.
The steps to replace filter are the same as the above steps.
Notes:
If filter is found broken or serious blocked, please replace it in time.
Kohler Co.
Pull down circuit breaker switch for concealed version
Tighten
Turn on
19
switch
handle
1381995-T01-G