Table of Contents
Advertisement
NOTE
The electrical parts work only when the ignition switch
is in position " ".
NOTE
The lighting system works only when the engine is run-
ning.
1) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
20
use and maintenance Habana 50/125 - Habana Custom 50/125
)
2) DIMMER SWITCH (
When the light switch is in position "
is in position "
", the high beam comes on, while if it is in po-
sition "
", the low beam comes on.
The high beam signaller is operated by pressing the dimmer
switch (
-
-
) to position (A) (
the position of the light switch (
NOTE
When the dimmer switch is released, the high beam
signaller is disconnected.
2) DIMMER SWITCH (
When it is in position "
light and the low beam are always on.
When it is in position "
The high beam signaller is operated by pressing the dimmer
switch (
-
-
) to position (A) (
NOTE
When the dimmer switch is released, the high beam
signaller is disconnected.
NOTE
The lights can be switched off only by stopping the
engine.
3) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
-
-
)
": if the dimmer switch
), independently of
-
- • ).
-
-
)
" the parking lights, the dashboard
", the high beam comes on.
).
)
Advertisement
Table of Contents
