Multifunction Lcd - APRILIA ATLANTIC 500 - 2003 Manual

1

MULTIFUNCTION LCD

When the ignition key (1) is turned to posi-
tion " ", on the multifunction LCD all seg-
ments are activated (this performs a func-
tional test of the components) and the last
function set after the vehicle was stopped will
be displayed.
CAUTION
After the first 625 mi (1,000 Km) and ev-
ery 3,750 mi (6,000 Km) thereafter, the
message SERVICE appears on the dis-
play.
In this case contact an aprilia dealer to
carry out the operations described in the
scheduled maintenance chart, see page
57 (SCHEDULED MAINTENANCE CHART).
6
7
2
5
AVG V
mph
BATT
SERVICE
LAP
4
3
The various functions are selected and then
shown on the display by pressing the button
(MODE) (2) located on the controls on the
left side of the handlebar.
The following segments make up the multi-
function LCD:
Stopwatch function indicator (3), scheduled
maintenance due icon (4), average speed
icon in miles per hour (mph) (5), average
speed (6), battery voltage icon (7), average
speed expressed in kilometers per hour icon
(Km/h) (8). (The same icon is used for the
"consumption levels" function expressed with
the symbol Km/l), consumption levels
espresso in G/ml (used only for the
versions) (9), maximum speed icon (10), ex-
ternal temperature icon expressed in de-
grees Celsius (°C) (11), external tempera-
ture icon expressed in degrees Fahrenheit
(°F) (12), six-digit display of the values for
the functions set and identified by the cor-
responding icons (13).
9 10
8
Pressing the MODE key, the following func-
tions are obtained in sequence:
Km/h Km/l Vmax
°C
°F
11
CEV
13 12
use and maintenance Atlantic 500
↓
Outside temperature in ° C
MODE
↓
Maximum speed + km/h or mph
MODE
↓
Average speed (km/h or mph)
MODE
↓
Battery charge (Bbatt)
MODE
↓
Fuel consumption (km/L or ML/G)
MODE
↓
Chronometer (LAP)
MODE
↓
Programmed maintenance intervals
(SERVICE)
MODE
37