Multifunction Lcd - APRILIA ATLANTIC 500 - 2002 Manual

6 9 10
7 8
5
AVG V Km/h Km/l Vmax
mph
BATT
SERVICE
4
LAP
3
13

MULTIFUNCTION LCD

When the ignition key (1) is turned to position
" ", on the multifunction LCD all segments
are activated (this performs a functional test
of the components) and the last function set
after the vehicle was stopped will be
displayed.
CAUTION
After the first 1000 Km and every 6000
Km thereafter, the message SERVICE
appears on the display.
In this case contact an aprilia dealer to
carry out the operations described in the
scheduled maintenance chart, see page
57 (SCHEDULED MAINTENANCE
CHART).
11
C
12
F
CEV
1
The various functions are selected and then
shown on the display by pressing the button
(MODE) (2) located on the controls on the
left side of the handlebar.
The following segments make up the
multifunction LCD:
Stopwatch function indicator (3), scheduled
maintenance due icon (4), average speed
icon in miles per hour (mph) (5), average
2
speed (6), battery voltage icon (7), average
speed expressed in kilometers per hour icon
(Km/h) (8). (The same icon is used for the
"consumption levels" function expressed with
the symbol Km/l), consumption levels
espresso in G/ml (used only for the versions
) (9), maximum speed icon (10),
external temperature icon expressed in
degrees Celsius (°C) (11), external
temperature icon expressed in degrees
Fahrenheit (°F) (12), six-digit display of the
values for the functions set and identified by
the corresponding icons (13).
use and maintenance Atlantic 500
37