Advertisement
Quick Links
DELL RUGGED 7030 TABLET
Description
Docking Station for Dell Rugged 7030 Tablet Lite
Docking Station for Dell Rugged 7030 Tablet Full
Cradle for Dell Rugged 7030 Tablet
Docking Station for Dell Rugged 7030 Tablet Lite with Power Adapter
Docking Station for Dell Rugged 7030 Tablet Lite with Isolated 20-60V
Power Adapter
Docking Station for Dell Rugged 7030 Tablet Full with Power Adapter
Cradle for Dell Rugged 7030 Tablet with Power Adapter
DOCKING STATION FOR
USER GUIDE
WWW.PRECISIONMOUNTS.COM
Part Number
AS7.D922.100
AS7.D922.110
AS7.D922.104
AS7.D922.100-PS
AS7.D922.100-PSF1
AS7.D922.110-PS
AS7.D922.104-PS
515 58th Ave SE, Calgary, Alberta, T2H 0P7
1-888-869-7652 | info@precisionmounts.com
Advertisement
Related Manuals for PMT AS7.D922.100
Summary of Contents for PMT AS7.D922.100
- Page 1 DELL RUGGED 7030 TABLET USER GUIDE Part Number Description Docking Station for Dell Rugged 7030 Tablet Lite AS7.D922.100 Docking Station for Dell Rugged 7030 Tablet Full AS7.D922.110 Cradle for Dell Rugged 7030 Tablet AS7.D922.104 Docking Station for Dell Rugged 7030 Tablet Lite with Power Adapter AS7.D922.100-PS...
- Page 2 In order to safely install and use PMT products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-...
- Page 3 DESCRIPTION OF PARTS Corner clamps Top clamp Trigger pin Lock Docking Connector 515 58th Ave SE, Calgary, Alberta, T2H 0P7 WWW.PRECISIONMOUNTS.COM 1-888-869-7652 | info@precisionmounts.com...
- Page 4 DESCRIPTION OF PARTS CONT’D Mounting plate with VESA 75 hole pattern and ¼-20 hardware Cable tie bar Mounting plate attachment screws (#10-32 UNF (x4)) 515 58th Ave SE, Calgary, Alberta, T2H 0P7 WWW.PRECISIONMOUNTS.COM 1-888-869-7652 | info@precisionmounts.com...
- Page 5 PORT IDENTIFICATION Power in RS-232 USB Type-A 19.5 Vdc Serial 3.0 (x2) HDMI 1.1 (Optional) USB Type-C RJ45 Ethernet 10/100 mbps Note: Use of HDMI cable with ferrite bead is necessary Note: Use of Ethernet cable with ferrite bead is necessary 515 58th Ave SE, Calgary, Alberta, T2H 0P7 WWW.PRECISIONMOUNTS.COM 1-888-869-7652 | info@precisionmounts.com...
- Page 6 INSTALLATION Step 1: Using a 1/8” Allen/Hex key (wrench), remove the mounting plate from the dock. Step 2: Install the mounting plate onto mounting infrastructure via the VESA 75 interface and the provided hardware. Be sure to orientate the plate in the correct position. Add the washer and tighten the bolts with the nuts.
- Page 7 DOCKING THE TABLET Step 1: Ensure lock is in the unlocked position Step 2: Completely lift the top clamp to the highest location. Step 3: Place tablet bottom edge first against the bottom stoppers. Ensure the tablet is centered in the dock. Then push back the tablet towards the dock.
- Page 8 UN-DOCKING THE TABLET Step 1: If previously locked, insert key and rotate lock to the unlocked position. Step 2: a. Using your thumb, push Top Clamp up. b. Then pull the top of the tablet away from the dock. Step 3: Once clear of the Top Clamp, lift the tablet out and away from the dock.
- Page 9 HDMI DRIVER INSTALL GUIDE FOR AS7.D922.110 ONLY Step 1: Make sure DC power is being supplied to the docking station and then dock the tablet. Step 2: Open the tablet’s file explorer system, in “This PC”, open the icon labelled “USB Drive” (this represents the HDMI connector port).
- Page 10 Regulatory model: AS7.D922.110 Certifications and test standards: EN ISO / IEC 17050-1:2004 ICES-003(A) / CISPR 32 / EN 50498 MIL-STD-810H:CHG1 RoHS(2011/65/EU) UKCA Made in Canada This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
Need help?
Do you have a question about the AS7.D922.100 and is the answer not in the manual?
Questions and answers