Page 1
TrimLine Vehicle Dock For Panasonic CF33 Laptop Computers User Guide Description Part Number TrimLine Dock for Panasonic CF33 Laptop, NPT AS7. P033.500 TrimLine Dock for Panasonic CF33 Laptop, DPT AS7. P033.502 TrimLine Dock for Panasonic CF33 Laptop, NPT w/ Screen Lock AS7.
SERVICING [ENTRETIEN]: • If the dock does not work as intended, please contact PMT for troubleshooting or to schedule a service. [Si le dock ne fonctionne pas comme prévu, contactez PMT pour le dépannage ou pour planifier un service.]...
Description of Parts and Layout Note: All pictures used in this guide are of Dual Pass Thru (DPT) with Screen Lock Module (Part no: AS7.P033.512). However processes and information relate to other variants of the same dock mentioned in previous page. Front View Back Hook (X2) Docking Connector Housing...
Page 4
Description of Parts Continued Rear View (without mounting plate) Serial External Antenna EXT ANT 2 HDMI Switch EXT ANT 1 USB 2.0 (X2) USB 2.0 (X2) Cable Power Management Bar Ethernet (X2) 15.6 Vdc IN USB 3.0 (X2)
Page 5
Docking the Laptop Step 1: Ensure that the dock is unlocked and unlatched. If locked, insert key and rotate lock 90 degrees counter-clockwise. If latched, push the latch inside such that the back hooks move all the way out. Step 2: Lead the front of the keyboard into the dock such that the pockets on keyboard line up with the front hooks.
Page 6
The cable tie bar has slots, so if needed, existing mounts as well as dedicated mounts the location can be adjusted slightly. from PMT. Use the supplied #¼-20 hardware for attaching it to the mount. Attach the mounting bracket to the dock...
Page 7
Screen Lock Module Screen Lock Module prevents theft deterrence of the tablet from the laptop while it is in the dock. Screen Lock module is not included in all the kits. It comes attached to the dock if it is included in the kit. A Screen Lock module could be purchased separately and installed later.
Page 8
Screen Support Screen Support provides additional support to the screen and reduce the screen rattle during dock usage. Screen Support is not included in any dock kits. It could be purchased separately and installed. Attach it to the driver side of the dock using the #6-32 hardware provided (as shown below).
Need help?
Do you have a question about the TrimLine NPT and is the answer not in the manual?
Questions and answers