Subscribe to Our Youtube Channel
Related Manuals for PMT AS7.G014.100
Summary of Contents for PMT AS7.G014.100
- Page 1 TrimLine Vehicle Dock For GammaTech SA-14 Durabook Computers User/Installation Guide Description Part Number SA-14 Vehicle Dock AS7.G014.100 www.precisionmounts.com...
-
Page 2: Top View
Description of Parts and Layout Top View Docking Connector Front Clamp Rear Clamp Alignment Pins Lock Docking Lever Lifter Buttons... - Page 3 Description of Parts Continued Bottom View Cable Tie Rail DC Input USB 2.0 Ethernet HDMI...
- Page 4 Description of Parts Continued SA-14 Vehicle Dock Interface Plate...
-
Page 5: Connecting Cables
(Zip Ties) to secure the cables to the cable tie rail as shown below. PMT recommends routing the cables so that they end up coming out the right side (passenger side) of the docking station. - Page 6 Attaching the Dock to a Mount First attach the interface plate to your mount using the appropriate hardware Next attach the dock (with cables already connected) to the interface plate using qty-4, 10-24 x ½” screws 4 screw locations for attaching the interface plate to the dock.
-
Page 7: Docking The Computer
Docking the Computer Step 1: Insert key and rotate 90 counter Step 2: Slide computer into dock front first so that clockwise to prepare dock for computer. Note front clamp grips computer in between handle. the docking lever springs forward and rear clamp slides back. - Page 8 Note: The computer is not fully secure until the handle is in it’s locked (back) position, and the key has been removed Photo shows SA-14 Vehicle Dock installed on PMT SightLine console in a 2013 Ford F150...
- Page 9 Removing the Computer From the Docking Station Step 1: Insert key and rotate 90 degrees Step 2: Remove the computer by lifting up counter clockwise. The docking lever will from the rear of the laptop, and sliding it spring forward releasing the rear clamp out of the dock Step 3: You may now rotate the key 90 degrees clockwise and remove which will...
Need help?
Do you have a question about the AS7.G014.100 and is the answer not in the manual?
Questions and answers