Pmt trimline vehicle dock for getac v100 and v200 computers (9 pages)
Summary of Contents for PMT AS7.D014.600-D
Page 1
TRIMLINE VEHICLE DOCK FOR DURABOOK Z14 LAPTOP Description Part Number TrimLine Dock for Durabook Z14 Laptop, Standard, AS7.D014.600-D TrimLine Dock for Durabook Z14 Laptop, Standard, AS7.D014.603-D 515 58th Ave SE, Calgary, Alberta, T2H 0P7 WWW.PRECISIONMOUNTS.COM 1-888-869-7652 | info@precisionmounts.com...
Page 2
SERVICING [ENTRETIEN]: • If the dock does not work as intended, please contact PMT for troubleshooting or to schedule a service. [Si le dock ne fonctionne pas comme prévu, contactez PMT pour le dépannage ou pour planifier un service.] •...
Page 3
DESCRIPTION OF PARTS AND LAYOUT Note: All pictures used in this guide are of triple pass thru (TPT) vehicle dock (Part no: AS7.D014.603-D). However processes and information relate to other variants of the same dock mentioned in previous pages Rear clamp Rear guide supports RF pass through Tie Bar...
Page 4
DESCRIPTION OF PARTS AND LAYOUT CONTINUED - REAR VIEW Speaker and Microphone Antenna Connectors (optional) Serial Display HDMI Ethernet USB 2.0(2) Power USB 3.0(2) 515 58th Ave SE, Calgary, Alberta, T2H 0P7 WWW.PRECISIONMOUNTS.COM 1-888-869-7652 | info@precisionmounts.com...
Page 5
DOCKING THE LAPTOP • Step 1 Ensure that the dock is unlocked and unlatched. If locked, insert key and rotate lock 90 degrees counter-clockwise. To unlatch, push the slider latch as shown in the picture. This allows the rear clamp to spring up to open position.
Page 6
UNDOCKING THE LAPTOP • Step 1 Ensure that the dock is unlocked. If locked, insert key and rotate lock 90 degrees counterclockwise. Push the latch to unlatch and undock the laptop. • Step 2 The latch enables the springs to open up and rear clamps extend out beyond the laptop slots as shown in the picture.
Page 7
4 supplied #10-24 UNC screws (2 on each side). • The standard mounting plate that comes with the PMT Z14 laptop dock features an industry standard VESA 75mm x 75mm bolt pattern.This allows easy...
Need help?
Do you have a question about the AS7.D014.600-D and is the answer not in the manual?
Questions and answers