Use of a new battery (04_18)
Remove the battery cover.
Place the battery «1» in its hous-
ing.
CAUTION
ALWAYS CONNECT THE BATTERY
04_18
BREATHER PIPE SO THAT SULPHU-
RIC ACID VAPOURS, WHEN RE-
LEASED THROUGH THE PIPE, DO
NOT CORRODE THE ELECTRICAL
SYSTEM, PAINTED PARTS, RUBBER
COMPONENTS OR GASKETS. (ONLY
125-250 VERSIONS).
Connect the positive lead (+)
first and then the negative one
(-).
Cover the leads and terminals
with neutral grease or petroleum
jelly.
Refit the battery cover.
106
Inwerkingstelling van een
nieuwe accu (04_18)
Verwijder het accudeksel.
Plaats de accu «1» op zijn
plaats.
LET OP
VERBINDT STEEDS DE ONTLUCH-
TING VAN DE ACCU, OM TE VERMIJ-
DEN DAT DE ZWAVELZUURDAMPEN
DIE UIT DE ONTLUCHTING KOMEN
DE ELEKTRISCHE INSTALLATIE, DE
GELAKTE DELEN, DE RUBBEREN
DETAILS OF DE PAKKINGEN KUN-
NEN AANTASTEN. (ENKEL VERSIE
125-250).
Verbindt eerst de positieve ka-
bel (+) en daarna de negatieve
kabel (-).
Bedek de terminals en de klem-
men met neutraal vet of vaseli-
ne.
Herplaats het accudeksel.